Fujitsu Suelo AGY35-KV Manual de operação - Página 13
Procurar online ou descarregar pdf Manual de operação para Ar condicionado Fujitsu Suelo AGY35-KV. Fujitsu Suelo AGY35-KV 13 páginas.
Imprimir página
The product starts to run on its own
□ Is the [
] indicator on the indoor unit blinking? (Refer to
State of indicator lamps.)
Refrigerant may have been leaked. Blowing operation is per-
formed to prevent the refrigerant from accumulating.
Open the windows to ventilate the room and contact an authorized
service personnel.
Immediately stop operation and turn off the electrical breaker in
following cases. Then consult authorized service personnel.
• The problem persists even if you perform these checks or
diagnostics.
• On the indoor unit, [
] and [
blinking fast.
State of indicator lamps
Lighting pattern:
Blinking,
State
Causes and solutions
Automatic defrosting operation
⇒ Please wait until fi nishing the
defrosting (maximum of 15 minutes).
Filter indicator
⇒ Clean the air fi lter and reset the fi lter
(3 times)
sign.
Error code display
⇒ Consult authorized service personnel.
(Fast)
Timer setting error because of Auto
restart
⇒ Reset the clock and timer settings.
Test run operation (for authorized
personnel only)
⇒ Press
Refrigerant leakage suspicion
⇒ Blowing operation is performed
(10 times)
to prevent the refrigerant from
(8 times)
(Fast)
accumulating.
Open the windows to ventilate the
room and contact an authorized
service personnel.
* Press the
sound.
Refrigerant leakage sensor error
⇒ Sensor may have occurred. Contact
(4 times)
an authorized service personnel.
(5 times)
(Fast)
* Operation may be performed, however,
contact an authorized service personnel
Restricted function
] blink while [
] is
Any state
See
page
10
10
to quit the test run.
button to stop the buzzer
10
Manual Auto operation and Filter indicator -
You can operate the air conditioner with
unit.
Status
Time to keep pressing
In operation More than 3 seconds
Stopping
2 seconds or less
More than 3 seconds and
less than 10 seconds
More than 10 seconds
(Only for servicing.*
*1) In multi connection, the operation mode follows the other indoor
units.
*2) To stop the forced cooling, press this button or
controller.
9
-
3
-
-
on the indoor
Mode or operation
Stop
Filter indicator reset
1)
Auto *
Forced cooling
2)
)
on the remote
En-12