Fujitsu UTY-RNRUZ2 Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Ar condicionado Fujitsu UTY-RNRUZ2. Fujitsu UTY-RNRUZ2 26 páginas. Remote controller (wired type)
Também para Fujitsu UTY-RNRUZ2: Manual de instalação (11 páginas)

Imprimir página
Fujitsu UTY-RNRUZ2 Manual de instruções
Notes
• The Operation button cannot be operated at screens
other than the Monitor Mode Screen.
• Depending on the occupied state and the indoor unit op-
eration state, the operation button needs to be pressed
twice. Refer to [4 OPERATION TIPS] → [4-5 Occupied
state].

2-2 Operation Settings

2-2-1 Set the Operation Mode

(1) Touch the [Mode] on the monitor mode screen.
(2) "Mode" screen is displayed. Select the operation mode.
(1)
Fri 10:00AM
Mode
Set Temp.
Fan
Cool
80°F
Custom
Auto
Auto
Heat
74°F
Room Temp.
Cool
84°F
Away
76°F
Occupied
Heat
68°F
Vacation
Status
Menu
Notes
• Only selectable modes are displayed. The selectable
modes may be different depending on the system con-
figuration and operation status. Refer to [4.OPERATION
TIPS]→[4-1 Selectable modes].
• When the "Fan" is selected, the
temperature cannot be set.
• The mode cannot be changed during Away operation.
Select the occupied state.
• [Custom Auto] mode can be used in the R.C. Group
to which Master Indoor Unit is set. It is not displayed
at other R.C. Group. It is not displayed at other indoor
units.
• When the following settings are not performed together,
[Custom Auto] cannot be used.
R.C. Sensor Setting: Used.
Refer to [3 SETTING] → [3-8 Initial Setting] → [3-8-5
R.C. Sensor Setting].
Master Indoor Unit Setting: Master Indoor Unit
For installer. Consult authorized service personnel.
• When the operation mode is switched in a heat recovery
system, operation preparations may take some time, but
this is not a malfunction.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
(2)
Mode
Cool
Dry
Heat
Custom
Fan
Auto
Cancel
OK
Fri 10:00AM
Mode
Set Temp.
Fan
Fan
Auto
Room Temp.
Cool
84°F
Away
76°F
Occupied
Heat
68°F
Vacation
Status
Menu

2-2-2 Set the Temperature

(1) Touch the [Set Temp.] on the
monitor mode screen.
(2) "Set Temp." screen is displayed. Adjust the room tem-
perature with the [ ] or [ ].
Custom Auto mode
Set Temp.
Cool
Heat
80
74
°F
°F
Cancel
OK
Notes
• The settable temperature range is different depend-
ing on the operation mode. Refer to [4 OPERATION
TIPS]→[4-3 Selectable Temperature Range].
• When the "Set Temp. Range Setting" is set, the select-
able temperature conforms to the setting. Refer to [3
SETTING] → [3-5 Special Setting] → [3-5-3 Set Temp.
Range Setting].
• During Away operation, the temperature cannot be set.
Select the occupied state.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.

2-2-3 Set the Fan Speed

(1) Touch the [Fan] on the monitor mode screen.
(2) "Fan" screen is displayed. Select the fan speed with the
[ ] or [ ].
(1)
Fri 10:00AM
Mode
Set Temp.
Fan
80°F
Cool
Custom
Auto
Auto
74°F
Heat
Room Temp.
Cool
84°F
Away
76°F
Heat
68°F
Occupied
Vacation
Status
Menu
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
Fri 10:00AM
Set Temp.
Mode
Fan
80°F
Cool
Custom
Auto
Auto
74°F
Heat
Cool
84°F
Room Temp.
Away
76°F
Heat
68°F
Occupied
Vacation
Status
Menu
Cool, Dry or Heat mode
Set Temp.
80
°F
Cancel
OK
(2)
Fan
Auto
Cancel
OK
En-8