Brother TD-2125NWB Manual do utilizador - Página 19

Procurar online ou descarregar pdf Manual do utilizador para Impressora Brother TD-2125NWB. Brother TD-2125NWB 38 páginas.

Imprimir página

Troubleshooting

Overview

This chapter explains how to resolve typical network problems you may encounter when using your Brother

printer. If, after reading this chapter, you are unable to resolve your problem, please visit the Brother support

website for further support at: support.brother.com.

First check the following:

The power cord is connected correctly and the Brother printer is turned on.

The wireless router is turned on and the link LED is flashing.

All protective packaging has been removed from the machine.

The front and top covers are fully closed.

The media roll is inserted correctly in the roll compartment.

(For wired networks) A network cable is securely connected to the Brother printer and the router or hub.

(For wireless networks) The network cable is not connected to the printer.

I cannot complete the wireless network setup configuration.

Question

Are your security settings

(SSID/Network Key)

correct?

Is your wireless router in

stealth mode? (not

broadcasting the SSID)

I have checked and tried all

of the above, but still cannot

complete the wireless

configuration. Is there

anything else I can do?

Is your Brother printer

correctly connected to the

wireless router?

Interface Solution

wireless



Confirm your security settings and network.

• The manufacturer's name or model number of the wireless router may

be the default security settings.

• See the instructions supplied with your wireless router for information

on how to find the security settings.

• Ask the manufacturer of your wireless router or ask your Internet

provider or network administrator.

wireless

Enter the correct SSID (Network Name) name during the installation or



when using "Communication settings" in the Printer Setting Tool.

Check the SSID (Network Name) in the instructions supplied with your



wireless router and reconfigure the wireless network setup.

wireless

Use "Communication settings" in the Printer Setting Tool.

wireless

If the STATUS indicator is lit, the network is correctly connected. If the

STATUS indicator is flashing, the network is not connected correctly, and

the wireless network setup must be reconfigured.