Fujitsu Lifebook A3040 Bios Manual - Página 23

Procurar online ou descarregar pdf Bios Manual para Computador portátil Fujitsu Lifebook A3040. Fujitsu Lifebook A3040 24 páginas. Bios setup utility
Também para Fujitsu Lifebook A3040: Manual do software (29 páginas)

Imprimir página
Fujitsu Lifebook A3040 Bios Manual
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.)
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
Table 17: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then
exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes] [No]
Changes
will be displayed.
Exit Discarding
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the
Changes
BIOS recognizes this selection it will load the operating system and begin operation.
Load Setup
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit
Defaults
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load pre-
Discard
vious now? [Yes] [No] will be displayed. When confirmed the setup utility will return to the Exit menu. To return
Changes
to another menu, follow the directions in the Navigating Through the Setup Utility Section.
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save
Save Changes
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to
the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility section.
Save Changes
Selecting Save Changes and Power Off will save any changes you've made into the BIOS memory for all menu fields,
and Power Off
then the system will power off. A message asking if you want to save the configuration changes will be displayed. When
[Yes] is pressed, the changes will be saved and the system will shut down.
BIOS SETUP UTILITY
v02.59 (C) Copyright 1985-2006, American Megatrends, Inc.
Figure 17. Exit Menu
E x i t M e n u
The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.
Exit
Exit System Setup and
save your changes to
CMOS.
F1: Help
Esc: Exit
23