Fujitsu Lifebook B112 Bios Manual - Página 10

Procurar online ou descarregar pdf Bios Manual para Computador portátil Fujitsu Lifebook B112. Fujitsu Lifebook B112 38 páginas. Lifebook b series
Também para Fujitsu Lifebook B112: Manual de planeamento de serviços (16 páginas)

Imprimir página

L i f e B o o k B S e r i e s B I O S

Serial/Parallel Port Configurations Submenu of the Advanced Menu

The Serial/Parallel Port Configurations submenu

provides the ability to set the I/O addresses and

interrupt levels for the serial, infrared and parallel

ports of your notebook.

C A U T I O N

I/O addresses, DMA channels and Interrupt levels

can be entered in various ways, including via the BIOS

setup utility, the control software for the I/O device,

or the hardware. If any two ports or devices, serial or

parallel, have the same I/O address assigned, your

notebook will not function normally. Please keep a

record of original settings before making any changes

in the event that a restoration is required. See your

hardware and software documentation as well as the

setup utility to determine settings, limitations, etc.

Serial Port:

I/O address:

Interrupt:

Infrared Port:

Mode:

I/O address:

Interrupt:

I/O address:

DMA channel:

Parallel port:

Mode:

I/O address:

Interrupt:

Help

ESC

Exit

PhoenixBIOS Setup Utility

Advanced

Serial/Parallel Port Configurations

Select Item

-/Space

Select Menu

Figure 4. Serial/Parallel Port Configurations Submenu

P O I N T

To prevent IRQ and address conflicts, avoid changing

the default settings. If you must change the settings,

you can call 1-800-8FUJITSU for technical assistance.

C A U T I O N

The BIOS will warn you of a resource conflict by placing

a yellow asterisk next to each device that is in conflict.

P O I N T

All I/O addresses in Table 5 are in hexadecimal.

[Enabled]

[3F8 - 3FF]

[Disabled]

[IRQ 4]

The port is disabled.

[Enabled]

[FIR]

[Enabled]

[2E8 - 2EF]

The port is enabled

[IRQ 3]

with user configuration.

[118 - 11F]

[DMA 3]

[Auto]

[Enabled]

The port is configured

[Bi-directional]

depending on 'Plug &

[378 - 37F]

Play OS' setting.

[IRQ 7]

Change Values

Enter

Select

Sub-Menu

Item Specific Help

Setup Defaults

F10

Save and Exit