Fujitsu LifeBook C-6581 Bios Manual - Página 31
Procurar online ou descarregar pdf Bios Manual para Computador portátil Fujitsu LifeBook C-6581. Fujitsu LifeBook C-6581 40 páginas. Bios setup utility
Também para Fujitsu LifeBook C-6581: Manual do software (39 páginas)
Imprimir página
Main
Power Savings:
Hard Disk Timeout:
Display Timeout:
Standby Timeout:
Auto Suspend Timeout:
Suspend Mode:
Auto Save To Disk:
Resume On Modem Ring:
Resume On Time:
Resume Time:
Advanced Features
F1
Help
ESC
Exit
Table 17: Fields, Options and Defaults for the Power Menu (for APM operating systems only)
Menu field
Options
Power Savings:
Disabled
Customized
Maximum
Power Savings
Maximum
Performance
Hard Disk Timeout:
Off
30 seconds to 20
Minutes
Display Timeout:
Off
2 to 20 Minutes
Standby Timeout:
Off
1 to 16 Minutes
PhoenixBIOS Setup Utility
Advanced
Security
[Customized]
[Off]
[Off]
[4 Minutes]
[15 Minutes]
[Suspend]
[Off]
[Off]
[Off]
[00:00:00]
Select Item
-/Space
Select Menu
Enter
Figure 17. Power Menu
Default
[Customized]
[Off]
[Off]
[4 Minutes]
Power
Boot
Info
Select Power Management
Mode. Choosing modes
changes system power
management settings.
Maximum Power Savings
conserves the greatest
amount of system power
while Maximum
Performance conserves
power but allows
greatest system
performance. To alter
these setting, choose
Customize. To turn off
power management,
choose Disabled.
Change Values
Select Sub-Menu
Description
Sets the power savings parameters to a factory installed
combination of parameters, a custom set of parameters set
by you or no power saving features.
Sets the length of time that the hard drive can be inactive before
your notebook automatically turns off the power to the hard drive
controller and drive motor. If you choose a factory installed
combination of parameters, this field will display the setting. If you
choose to customize the parameters you will be able to set this
yourself. The options available vary from Off, which has no
inactivity shutoff, to 20 minutes.
Sets the length of time without any user input device activity before
the display is turned off. If you choose a factory combination of
parameters, this field will display the setting. If you choose to
customize the parameters, you will be able to set this yourself. Off
has no inactivity shutoff.
Sets the length of time without any user input device activity before
the CPU is set to half speed and the display and the hard drive are
turned off. If you choose a factory combination of parameters, this
field will display the setting. If you choose to customize the
parameters you will be able to set this yourself.
P o w e r M e n u
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
31