Fujitsu LIFEBOOK E Series Manual do utilizador - Página 15
Procurar online ou descarregar pdf Manual do utilizador para Computador portátil Fujitsu LIFEBOOK E Series. Fujitsu LIFEBOOK E Series 34 páginas.
Também para Fujitsu LIFEBOOK E Series: Manual fácil (41 páginas)
Imprimir página
Wireless LAN.book Page 13 Wednesday, November 28, 2001 11:30 AM
4. Click [OK]. The folder is set shared, and the "Work"
folder icon changes.
Printer Sharing
1. Click [Start] -> [Settings] -> [Printers]. The
Printers window appears, showing the printers that
are connected.
2. Right click the printer that you want to share, then
click [Sharing] from the menu that appears.
3. Click [Sharing], and select necessary items.
Item
Not Shared
Disables printer sharing.
Shared As
Enables printer sharing.
Share Name
Specifies a share name of the
printer to be shared.
Comment
Enter the description of the printer
to be shared.
Passwords
If you specify a password, you
need to enter it when using the
printer.
Table 10: Printer Sharing
4. Click [OK]. The printer sharing is set, and the icon
changes.
Checking the Connection
After the network setting is completed, access the shared
drive on another computer to check the connectivity of
the wireless LAN network.
Accessing Another Computer
1. Double-click the [My Network Places] icon on the
desktop. [My Network Places] appears.
2. Double-click [Computers near me]. The computers
that are connected to the network are displayed.
3. Double-click the computer that you want to access.
The drive that you set with "Sharing" are displayed.
4. Double-click the drive that you want to access. The
drive is displayed showing its contents and made
available to you. If you have any questions or prob-
lems, refer to "Troubleshooting" on page 19.
Checking the Connectivity
1. Click [Start] -> [Settings] -> [Control Panel].
2. Double-click the [PRISM Settings] icon. [PRISM
Wireless Settings] appears.
3. Check the connectivity on the [Link] tab. The
State
Description
Current Channel
Current Tx Rate
[Radio Off]/
[Radio On]
[Rescan] button
Throughput
(Bytes/sec)
Link Quality
Signal Strength
C o n n e c t i n g w i t h W i n d o w s 9 8 / 2 0 0 0
current condition of connection is displayed.
Item
Description
Shows the current condition of
connection.
The MAC address of the other
computer to which you are
connected is displayed when the
connection is successful. If you are
connected to more than one
computer, the computer that has
the best connectivity is displayed.
Shows the current channel used
for the connection.
Shows the current transfer rate in
Mbits/sec.
Click [Radio Off] to disconnect.
Click [Radio On] to connect to the
network.
Click this button to search for
others to connect to.
Shows the actual transfer rate of
the data transfer for send (Tx) and
receive (Rx).
Shows either [Excellent], [Good],
[Fair], [Poor], or [Not Connected],
depending on the link quality.
Not shown for AdHoc connection.
Shows either [Excellent], [Good],
[Fair], [Poor], or [Not Connected],
depending on the signal strength.
Not shown for AdHoc connection.
Table 11: Checking connectivity
13