Fujitsu Lifebook E-6634 Bios Manual - Página 8
Procurar online ou descarregar pdf Bios Manual para Computador portátil Fujitsu Lifebook E-6634. Fujitsu Lifebook E-6634 33 páginas. Lifebook e series
Imprimir página
L i f e B o o k E S e r i e s B I O S
Secondary Master Submenu of the Main Menu
The Secondary Master submenu allows you to configure secondary ATA devices.
Main
Secondary Master [MATSHITADVD-ROM SR-8175-(SM)]
Type:
Multi-Sector Transfers:
LBA Mode Control:
PIO Transfer Mode:
DMA Transfer Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
CD-ROM
SuperDisk
Hard Disk
Cylinders:
A number between
0 and 65,535
Heads:
A number between
1 and 16
Sectors:
A number between
0 and 63
Maximum
Display only
Capacity:
8
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 3. Secondary Master Submenu
Default
[Auto]
–—
–—
–—
–—
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM,
SuperDisk or Hard Disk for appropriate drive type installed at
this connection.
This item appears only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk, or User is selected.
Setup Defaults
Save and Exit