Brother P-touch H500 Manual de configuração rápida - Página 23

Procurar online ou descarregar pdf Manual de configuração rápida para Fabricante de etiquetas Brother P-touch H500. Brother P-touch H500 36 páginas.

Confirm that the hooks on the edge of the rear cover are inserted correctly, and then

reattach the cover.

If you cannot attach the rear cover, check to ensure the white lever is in the up

position. If not, lift the lever, and then attach the cover.

Removing the Rechargeable Li-ion Battery

Remove the battery cover and the rechargeable Li-ion battery, and then reattach the battery

cover.

 Charging the Rechargeable Li-ion Battery

The rechargeable Li-ion battery can be charged while it is inserted in the P-touch. Perform

the following procedure to charge the rechargeable Li-ion battery.

• Before using the rechargeable Li-ion battery, use the following procedure to charge it.

• Up to 360 minutes is needed to fully charge a rechargeable Li-ion battery.

Make sure that the P-touch is turned off. If the P-touch is turned on, press the

(Power) button to turn it off.

Make sure that the rechargeable Li-ion battery is installed in the P-touch.

Use the AC adapter and AC power cord to connect the P-touch

to an AC power socket.

The LED next to the adapter connector turns on during

charging, it goes off when the rechargeable Li-ion battery is

fully charged. The battery level indicator on the display will fill

with three bars

Stopping Rechargeable Li-ion Battery Charging

To stop rechargeable Li-ion battery from charging, disconnect the AC adapter cord.

Tips on Using the Rechargeable Li-ion Battery

• Charge the rechargeable Li-ion battery before use. Do not use it before it is charged.

• The rechargeable Li-ion battery charging can take place in 5°C-35°C environments.

Charge the rechargeable Li-ion battery in an environment in this temperature range.

If the surrounding temperature is out of this range, the rechargeable Li-ion battery

will not be charged, and the battery indicator will remain lit.

• If the P-touch is used when both the rechargeable Li-ion battery is installed and the

AC adapter is connected, the battery indicator may turn off and charging may stop

even if the rechargeable Li-ion battery has not been fully charged.

Power Supply