Brother P-touch LN0617001 Manual do utilizador

Procurar online ou descarregar pdf Manual do utilizador para Fabricante de etiquetas Brother P-touch LN0617001. Brother P-touch LN0617001 2 páginas. Brother label maker user's guide

Imprimir página

The stylish and portable PT-55 allows you to quickly and easily print labels anywhere you go. Simply switch on the P-touch,

enter the text, and then print out your label. You can also choose from various character sizes, styles, and framing/background

patterns in addition to underlining. In addition, you can specify the length of the label. The text can be printed on either one

or two lines and can include special symbols and accented characters. Various tape colours and two tape widths (9 mm and

12 mm) are available for creating personalised labels.

Care and precautions

• Clean the machine using only a soft, dry cloth.

• Use only AAA-size (LR03) alkaline batteries.

• Do not expose the machine or the tape cassettes to

high temperatures, high humidity, or excessive dust.

• If you do not intend to use the machine for an

extended period of time, remove the batteries.

• Do not touch the tape cutter button while printing.

• Do not touch the cutter blade.

• Do not block the tape exit slot. (Fig. 1)

• Do not put labels in your mouth.

• Do not afﬁx labels to skin.

Fig. 1

LN0617001

Before using the P-touch, read this instruction leaﬂet, and then keep it

in a handy place for future reference.

With this machine, use only tape cassettes bearing the

For a list of the tape cassettes that can be used with this machine,

refer to Accessories at the bottom of this page.

Installing/replacing

batteries

1) Remove the back cover by pressing in the rough

area at the top end of the machine and pulling off

the cover. (Fig. 2)

2) If a tape cassette is already installed, remove it.

For details on removing the tape cassette, refer

to Installing/changing the tape cassette.

3) If batteries are already installed, remove them.

4) Insert four new AAA-size (LR03) alkaline batteries

as shown below. (Fig. 3)

Be sure that the two batteries on the left side of

the P-touch are inserted with their positive poles

pointing toward the bottom end of the machine

and that the two batteries on the right side of the

P-touch are inserted with their positive poles

pointing to the top end of the machine.

Always replace all four batteries at the same time

using brand new ones.

5) Insert the tape cassette.

For details on inserting the tape cassette, refer

to Installing/changing the tape cassette.

6) Attach the back cover by inserting the two hooks on

the bottom end of the cover into the matching slots

on the bottom end of the machine, then pushing

down ﬁrmly on the cover until it snaps into place.

Back cover

Fig. 2

Right side

Fig. 3

Installing/changing the

tape cassette

1) Remove the back cover by pressing in the rough

logo.

area at the top end of the machine and pulling off

TAPE

the cover.

2) If a tape cassette is already installed, remove it by

pulling it straight out.

3) Make sure that the end of the tape feeds under the

tape guides as shown below. (Fig. 4)

If you are installing a new tape cassette, be sure

to remove the paper tab.

4) Insert the tape cassette, making sure that it snaps

into place.

Make sure that the tape cassette ﬁts properly

around the two guides in the cassette compart-

ment. (Fig. 5)

5) Attach the back cover by inserting the two hooks on

the bottom end of the cover into the matching slots

on the bottom end of the machine, then pushing

down ﬁrmly on the cover until it snaps into place.

(Fig. 6)

The amount of tape remaining in the cassette is

visible through the window in the back of the P-

touch.

When green tape is fed out, the tape cassette is

empty.

CAUTION

•

Be sure to use only the tape cassettes listed in

Accessories. The following tape cassettes can NOT

be used with the PT-55 (i.e. tapes with a metallic

appearance):

M-531, M-731, M-831, M-931, M-E31, M-521, M-721,

M-821, M-921 and M-E21

Tape guides

Fig. 4

Tape cutter button

Guides

Left

Fig. 5

Cleaning the print

head

When dust accumulates on the print head, blank hori-

zontal lines appear through the printed label. If this

occurs, clean the print head.

1) Turn off the P-touch.

2) Remove the back cover by pressing in the rough

area at the top end of the machine and pulling off

the cover, and then remove the tape cassette.

3) Use a dry cotton swab to gently wipe the print head

and the rubber pinch roller with an up-and-down

motion. (Fig. 7)

4) Insert the tape cassette, and then attach the back

cover by inserting the two hooks on the bottom end

of the cover into the matching slots on the bottom

end of the machine, then pushing down ﬁrmly on

the cover until it snaps into place.

5) Turn on the machine, enter some text, and then

press

6) If blank lines still appear in the printed label, repeat

steps 1 through 4 using a cotton swab dipped in

isopropyl (rubbing) alcohol.

Thermal print head

Fig. 7

Accessories

The following accessories are available for the PT-55.

Cassettes with 8-meter long tape

Black characters on white adhesive

Red characters on white adhesive

Blue characters on white adhesive

Black characters on blue adhesive

Black characters on yellow adhesive

Fig. 6

Rubber pinch roller

12 mm

9 mm

M-K231

M-K221

M-K232

M-K222

M-K233

M-K223

M-K531

M-K521

M-K631

M-K621