Fujitsu LifeBook E7010 Bios Manual - Página 8

Procurar online ou descarregar pdf Bios Manual para Computador portátil Fujitsu LifeBook E7010. Fujitsu LifeBook E7010 29 páginas. Lifebook e series

Imprimir página
L i f e B o o k E S e r i e s B I O S
Secondary Master Submenu of the Main Menu
The Secondary Master submenu allows you to configure secondary ATA devices.
Main
Secondary Master [TOSHIBA DVD-ROM SD-R2212-(SM)]
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field
Options
I
Type:
Auto
I
None
I
CD-ROM
I
SuperDisk
I
Hard Disk
CHS Format
I
Cylinders:
A number between
0 and 65,535
I
Heads:
A number between
1 and 16
I
Sectors:
A number between
0 and 63
8
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 3. Secondary Master Submenu
Default
[Auto]
–—
–—
–—
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
NOTE: The Type field does not appear as a drop-down menu. Tap
the spacebar to cycle through the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM,
SuperDisk or Hard Disk for appropriate drive type installed at
this connection.
Cylinders/Heads/Sectors
This item appears only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Setup Defaults
Save and Exit