Brother P-Touch PT-E800W Manual de configuração rápida - Página 8

Procurar online ou descarregar pdf Manual de configuração rápida para Fabricante de etiquetas Brother P-Touch PT-E800W. Brother P-Touch PT-E800W 9 páginas.

Imprimir página

Brother P-Touch PT-E800W Manual de configuração rápida

Installing the Software and Printer Driver to a Computer

To print from your Windows computer or Mac, install the printer driver,

P-touch Editor and other applications to your computer.

Visit our website (www.brother.com/inst) and download the installer

for the software and manuals.

Double-click the downloaded .exe file and follow the on-screen

instructions to proceed with the installation.

NOTE

To connect the P-touch labeling system to a computer using a wireless

connection:

•

We recommended configuring the wireless network settings while

installing the software. You can change the settings later using

[Settings] in the Home screen or the Printer Setting Tool. For more

information, see the User's Guide.

•

We recommended installing the software on a computer wirelessly

connected to your network and configuring the P-touch labeling

system using a USB cable.

•

We recommend preparing the SSID (network name) and password

(network key) of the wireless network in advance.

•

If your wireless access point/router supports WPS, you can use

one-push WPS (Wi-Fi Protected Setup) to quickly configure the

wireless network settings.

Close the dialog box when the installation is complete.

Connecting the P-touch Labeling System to a Computer

You can connect the P-touch labeling system to a Windows computer or Mac

using a USB cable, or wireless LAN. For more information, see the User's

Guide.

 Connecting Using USB

Connect the P-touch labeling system end of the USB cable to the USB

port on the back of the P-touch labeling system.

Connect the other end of the USB cable to the USB port on the

computer.

Turn on the P-touch labeling system.

 Connecting Using Wi-Fi

Turn on the P-touch labeling system.

Press and hold the

(Wi-Fi) button on your P-touch labeling system

for one second to turn the Wi-Fi function on. The

starts flashing in green once every three seconds.

• Ad-Hoc Mode

For Windows, after installing the printer driver and other applications

to your computer, set the Ad-Hoc mode using the Printer Setting Tool

installed on the computer. (See the User's Guide.)

For Mac, set the Ad-Hoc mode using the Wireless Device Setup

Wizard.

Troubleshooting

LCD Problems

Problem

Solution

The screen is locked, or

Reset the internal memory to the factory

the P-touch labeling

settings. For more information, see the User's

system does not respond

Guide. If resetting the P-touch labeling system

normally.

does not solve the problem, disconnect the AC

adapter and remove the battery for more than

10 minutes.

The display remains blank

The P-touch labeling system is receiving no

after turning on the power.

power.

If using AC power, connect the AC adapter

The POWER indicator

correctly to the P-touch labeling system and an

does not light

AC power outlet.

If using a rechargeable Li-ion battery, make

sure the rechargeable Li-ion battery is firmly

installed in the P-touch labeling system and is

fully charged.

Check that the keyboard LCD unit cable is

securely connected to the keyboard LCD unit

and keyboard LCD unit interface of the P-touch

labeling system.

The LCD messages are

See Setting Language and Unit in this guide to

displayed in a foreign

select the language you want.

language.

Printing Problems

Problem

The label is not printed.

The label is not printed

correctly.

The tape is jammed.

The ink ribbon is separated

from the ink roller.

(Wi-Fi) indicator

The P-touch labeling

system stops while printing

a label.

The label is not cut

automatically.

A tape jam error cannot be

cleared despite following

the troubleshooting steps.

I want to make fine

adjustments to the print

result.

Version Information

Problem

I do not know the version

number of the firmware of

my P-touch labeling

system.

I want to confirm whether I

am using the latest version

of the software.

Solution

• Check that text has been entered and that

the tape cassette is installed correctly with

sufficient tape remaining.

• If the tape is bent, cut off the bent section and

thread the tape through the exit slot or tape

guides.

• When printing from a computer or mobile device,

make sure the computer or mobile device is

connected correctly to the P-touch labeling system.

• Remove the tape cassette and reinstall it,

pressing it firmly until it locks into place.

• If the print head is dirty, clean it with a cotton

swab or optional print head cleaning cassette

(TZe-CL6).

• If the tape is jammed, remove the tape

cassette from the P-touch labeling system.

• Check the tape cassette compartment and tape

exit slot for tape scraps, jammed tape or debris

that may prevent the tape from correctly exiting

the machine. Remove if present.

• Examine the tape cassette and cut away any

damaged tape that is present past the tape

guides on the tape cassette.

• Check that the end of the tape is not bent and

that is passes through the tape guides. For

more information, see section Inserting a

Tape Cassette of this guide.

• Insert the tape cassette into the tape cassette

compartment.

If the ink ribbon is broken, replace the tape

cassette. If not, leave the tape uncut and

remove the tape cassette, then wind the loose

ink ribbon onto the spool as shown in the figure.

Spool

Note:

Do not pull the label when the P-touch

labeling system is ejecting it from the tape exit

slot. Doing so will cause the ink ribbon to be

pulled out with the tape. The tape may no longer

be functional after the ink ribbon is pulled out.

• Replace the tape cassette if striped tape is

visible, as this indicates that you have

reached the end of the tape.

• Connect the AC adapter directly to the

P-touch labeling system, or charge the

rechargeable Li-ion battery.

Check the Cut Option setting. For more

information, see the User's Guide.

To cut labels manually, press the

and Cut) button to feed and cut the tape.

Contact Brother customer service.

The length and margins can be adjusted in the

Printer Setting Tool. For more information, see

User's Guide.

Solution

The version number and other information for

the firmware can be confirmed using the

following procedure:

Select [Settings] in the Home screen

using the

press the OK or Enter key.

Select [Version Information] using the

key, and then press the OK or

Enter key.

In addition, you can also use the following

procedure.

Turn on your P-touch labeling system.

Press and hold the

(Feed and Cut)

button for more than 10 seconds to print the

report.

(Use 0.94" (24 mm) or 1.4" (36 mm) tape.)

For more information, see the User's Guide.

Use the P-touch Update Software to confirm if

you have the latest version.

For more information, refer to the User's Guide.

(Feed

key, and then