Brother P-Touch PT-H300 Manual do operador - Página 5
Procurar online ou descarregar pdf Manual do operador para Fabricante de etiquetas Brother P-Touch PT-H300. Brother P-Touch PT-H300 6 páginas. Electronic labeling systems
Também para Brother P-Touch PT-H300: Especificações (5 páginas)
Imprimir página
GETTING STARTED - Turning Power On/Off
1. Press the
(Power) to turn the P-touch printer on.
2. Press the
(Power) to turn the P-touch printer off.
GETTING STARTED – Installing a Label Cartridge
1. If the new label cartridge has a
cardboard stopper, be sure to remove
the stopper before inserting the
cassette.
2. Check that the end of the tape is not
bent and it passes through the tape
guide at least ½ inch, also make sure
that the ink ribbon is wound tight.
(see photo).
3. After making sure that the power is off,
place the P-touch printer on a flat surface and open the rear cover. If there is
already a tape cassette in the P-touch, remove it by pulling it straight up.
4. Insert the label cartridge into the compartment with the end of the tape
protruding out of the P-touch printer tape
exit slot and press firmly until you hear it
click.
When inserting the label cartridge, make
sure that the tape and ribbon do not
catch on the print head. If there is slack in the tape, pull the tape
through the tape guide.
5. Close the rear cover.
6. DO NOT PULL THE LABEL WHILE IT IS COMING OUT OF THE
PRINTER. DOING SO WILL CAUSE THE INK RIBBON TO PULL OUT OF
THE EXIT SLOT AND TO BE CUT WHEN THE LABEL IS CUT. THIS
WILL CAUSE THE LABEL CARTRIDGE TO NO LONGER FUNCTION.
Page - 6
GETTING STARTED – Key Names & Functions (continued)
13 Clear - Clears all text entered or all text and current label settings.
) - Moves the cursor in the direction of the arrow.
14 Cursor (
15 OK - Selects the displayed option.
16 Letter - Use these keys to type letters or numbers. Use Caps or Shift key
to type uppercase letters and symbols.
17 Backspace – Deletes the character to the left of the cursor.
18 Shift – Use this key in combination with the letter and number keys
uppercase letters or the blue symbols on the number keys.
19 Caps – Turns Caps mode on and off.
20 Accent – Use this to select and enter an accented character.
21 Space - Enters a blank space. Returns a setting to the default value.
22 Bar Code – Opens the Bar Code Setup screen.
23 Enter – Enters a new line when entering text.
Shift Enter – Enters a new block.
Page – 3