Brother P-touch QL-1050N Manual do utilizador - Página 32

Procurar online ou descarregar pdf Manual do utilizador para Fabricante de etiquetas Brother P-touch QL-1050N. Brother P-touch QL-1050N 42 páginas. Quick setup guide (español) - english
Também para Brother P-touch QL-1050N: Manual de início rápido (2 páginas), Manual do utilizador da rede (41 páginas), Guia rápido (2 páginas), Manual de início rápido (2 páginas), Manual do utilizador (41 páginas), Manual do utilizador (24 páginas)

Imprimir página
Brother P-touch QL-1050N Manual do utilizador

Appendix

Controlling with the ESC/P Commands

Fonts and several bar codes are embedded within this machine. You can send commands to print embedded
characters and barcodes.

Available Commands

Commands available are P-touch proprietary commands based on ESC/P.
For details, see the "Command Reference" included in the CD-ROM.
([CD Drive]:\Doc\Technical)

Serial Cables

The pin assignments for the serial cables (RS-232C cables) which can be used with this machine are shown
in the table below. You can purchase the cables at an electronics store. Do not use an interface cable that is
longer than 6 feet (2.0 meters).
Brother QL-1060N side
(D-sub female, lock screw #4-40 inch screw)
Signal
Name
Number
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
RI
The RS-232C serial connector part of this equipment is not Limited Power Source.
Pin
1
2
3
4
5
6
7
8
9
Pin Assignments
32
Available Commands
PC side
(D-Sub9P female)
Pin
Signal
Number
Name
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI