AEG L 87480 FL Manual do utilizador - Página 21
Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar roupa AEG L 87480 FL. AEG L 87480 FL 40 páginas.
Também para AEG L 87480 FL: Manual do utilizador (40 páginas), Manual do utilizador (32 páginas), Manual do utilizador (36 páginas)
Imprimir página
CANCEL A PROGRAMME
1. Press button
gramme and to deactivate the ap-
pliance.
2. Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
1. Press button
flashes.
2. Change the function set.
SET THE DELAY START
1. Press button
until the display shows the number
of minutes or hours. The related
symbols comes on.
2. Press button
starts the countdown of the delay
start.
When the countdown is comple-
ted, the programme starts auto-
matically.
Before you press button
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.
AT THE END OF THE PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
• The indicator of the Start/Pause but-
ton
4
• The door lock symbol goes off.
• Press button
pliance. After five minutes from the
end of the programme, the energy
1
to cancel the pro-
1
again to activate
. The indicator
4
again and again
5
, the appliance
4
comes on.
goes off.
1
to deactivate the ap-
CANCEL THE DELAY START
1. Press button
cator flashes.
2. Press button
until the display shows 0'.
3. Press button
starts.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Press button
symbol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is
to
4
If you deactivate the appliance,
it is necessary to set the pro-
gramme again.
saving function automatically deacti-
vates the appliance.
When you activate the appli-
ance again, the display show the
end of the last set programme.
Turn the programme knob to
set a new cycle.
• Remove the laundry from the appli-
ance. Make sure that the drum is
empty.
ENGLISH
4
. The related indi-
5
again and again
4
. The programme
. The door lock
4
. The programme or the
4
in the drum.
21