Brother PT-E500 Manual de configuração rápida - Página 23
Procurar online ou descarregar pdf Manual de configuração rápida para Fabricante de etiquetas Brother PT-E500. Brother PT-E500 46 páginas. Electronic labeling system
Também para Brother PT-E500: Manual do operador (6 páginas)
Imprimir página
AC Adapter
Use the AD-E001 (AC adapter) for this P-touch labeling system. Connect the AC adapter
directly to the P-touch labeling system.
The AD-18 or AD-24ES cannot be used.
1
Insert the plug on the AC adapter cord into the connector marked DC IN 12V on the
P-touch labeling system.
2
Insert the AC adapter plug into a standard electrical outlet.
• Turn the P-touch labeling system off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.
• When power is disconnected for more than two minutes, all text and format settings will be
cleared. Any text files stored in the memory will also be cleared.
• Downloaded symbols, templates and databases will be saved, even with no power available.
To safeguard and backup the P-touch labeling system's memory, when the AC adapter is
unplugged it is recommended to have rechargeable Li-ion batteries (BA-E001), AA-size alkaline
batteries (LR6) or Ni-MH rechargeable batteries (HR6) installed in the P-touch labeling system.
Rechargeable Li-ion Battery
Installing the Rechargeable Li-ion Battery
1
Open the rear cover by pressing the cover latch.
1. Rear cover
2. Cover latch
2
Insert the rechargeable Li-ion battery into the battery
compartment.
Power Supply
23
Power Supply