Brother QL-1050 Manual do utilizador do software - Página 42

Procurar online ou descarregar pdf Manual do utilizador do software para Fabricante de etiquetas Brother QL-1050. Brother QL-1050 48 páginas. Label printer
Também para Brother QL-1050: Manual do condutor (27 páginas), Manual de início rápido (2 páginas), Manual do utilizador do software (40 páginas), Ficha de especificações (2 páginas), Guia rápido (2 páginas), Manual do utilizador (40 páginas), Manual de início rápido (2 páginas), Manual do utilizador (48 páginas), Manual de instalação do software (15 páginas)

In the [Distributed Printing Settings]

dialog box, select the printers to be used

for distributed printing.

1.Click [Detect Current Paper Information...].

2.The current printer information that was

detected appears below "Current paper" and

"Paper Type".

3.Select the check box beside the "Printer Name"

to be used for distributed printing.

If multiple printers are connected, you can find the desired printer from its port name.

The xxxxxxxxxxxx in BRNxxxxxxxxxxxx in the port name indicates the MAC address/Ethernet

address of the printer.

The MAC address/Ethernet address can be checked by printing the printer set-up information.

Press and hold down the Cut button when the power is on to print the printer set-up information.

Specify the label size to be used for

printing.

A. If only one printer has been selected.

In the dialog box from step 4, select the printer

whose setting is to be specified, and then either

double-click it or right-click it and click "Settings".

From the "Set paper" drop-down list, select the

label size.

Information to be displayed in the dialog box from step 4 can be entered in the "Notes" text box.

B. If multiple printers have been selected.

In the dialog box from step 4, select the printers

whose setting are to be specified, and right-click

them and click "Settings". From the "Set paper"

drop-down list, select the label size. The same

label size setting is applied to all selected

printers.

The settings below "Printer Settings" and "Notes" are not available.

Click [OK] to close the label size setting window.

Click [OK] to close the "Distributed Printing Settings" window.

Setup is completed.

Click [OK] to start distributed printing.

• If the selected label size is different from that displayed beside "Current paper",

beside the setting below "Current paper". Load the printer with label specified "Set paper".

• We recommend performing a connection test for your operating environment.

Distributed printing

appears