Brother QL-700 Manual do utilizador do software - Página 26

Procurar online ou descarregar pdf Manual do utilizador do software para Fabricante de etiquetas Brother QL-700. Brother QL-700 48 páginas. Ql series
Também para Brother QL-700: Manual do utilizador do software (40 páginas), Manual do utilizador (8 páginas), Manual de configuração rápida (2 páginas), Manual de configuração rápida (2 páginas), Manual de início rápido (2 páginas), Manual do utilizador (8 páginas)

Brother QL-700 Manual do utilizador do software
Transferring templates to the printer via the network
(QL-580N / 1060N / 720NW only)
To transfer the templates to the printer via the network, you need to use BRAdmin Professional. BRAdmin
Professional can be downloaded from our website at http://solutions.brother.com.
The printer names and pictures in the following screens may differ from your purchased printer. The screens
may vary depending on the model.
1
Create the template you want to transfer with P-touch Editor 5.0, then choose [File]-
[Transfer Template...] menu to register.
2
Click
to save the registered template in .blf format.
3
Start BRAdmin Professional.
Choose the printer and [Load Firmware] from the [Control]
menu.
If multiple printers are connected, you can find the
desired printer from its IP address.
The IP address can be checked by printing the printer
set-up information.
Press and hold down the Cut button when the power is
on to print the printer set-up information.
4
Choose Load Firmware function of the BRAdmin
Professional.
Choose [TFTP PUT] and click the [OK] button.
5
Choose the file in .blf format which you saved in step 2
and load it to the printer.
Choose the .blf file and click the [OK] button.
The default password is "access".
25
Transferring templates to the printer via the network (QL-580N /
1060N / 720NW only)