Brother QL-810W Manual de configuração rápida - Página 7

Procurar online ou descarregar pdf Manual de configuração rápida para Fabricante de etiquetas Brother QL-810W. Brother QL-810W 10 páginas. Dk label. dk tape
Também para Brother QL-810W: Manual de configuração rápida (10 páginas), Manual de Segurança do Produto (11 páginas), Manual de instalação (5 páginas), Manual (2 páginas)

11. Printing Using a Computer (P-touch Editor Lite for QL-810W only)

Turn the Label Printer On, then press and hold the P-touch Editor Lite Button until the green

P-touch Editor Lite LED turns on.

Editor Lite Button

NOTE

QL-810W only: P-touch Editor Lite is set as the default mode.

Connect the USB Cable to your computer.

NOTE

• Unplug the USB Cable and confirm if the Label Printer is power on.

• If you are connecting the Label Printer using a USB Cable, it may not be detected correctly. If this happens,

unplug the USB Cable, make sure the Label Printer is On, and then reconnect the USB Cable.

After the USB Cable is connected, a dialog box appears on your computer monitor.

(The following screens may differ depending on your operating system, but the operating

procedures are same.)

Windows Vista

Click P-touch Editor Lite.

Windows

7 / 8 / 8.1 / 10

Click Open folder to view files.

Editor Lite LED

Double-click PTLITE10.

11. Printing Using a Computer (P-touch Editor Lite for QL-810W only) (cont)

NOTE

• If you do not see the dialog box, it may be hidden behind an open software program window. Minimize all

windows to view the dialog box.

• It will take longer than usual to start P-touch Editor Lite when connecting the Label Printer to your computer

for the first time. If the software does not start automatically when you connect the Label Printer, you may

launch it from My Computer. Start P-touch Editor Lite by double-clicking PTLITE10.EXE.

When using Windows Vista

When connecting the device for the first time, perform the scan and then select the Always do this for

software and games check box on the dialog box displayed when the scan completes. P-touch Editor Lite

will start automatically the next time you connect the QL-810W.

P-touch Editor Lite launches.

IMPORTANT

Do not turn off or disconnect the Label Printer while using P-touch Editor Lite.

When using Macintosh

P-touch Editor Lite is not available for Macintosh. The [QL-810W] icon is displayed when the Label Printer

is connected to a Mac in the P-touch Editor Lite mode. Open [QL-810W] from the desktop, and then execute

[Start Here Mac]. If P-touch Editor 5.1 and the Label Printer drivers are not installed, a message advising to

install is displayed. Install them, and use P-touch Editor 5.1.

NOTE

For more information and instructions on how to use the P-touch Editor Lite, see the User's Guide.