Brother DCP120C - Flatbed Multifunction Photo Capture Center Manual de configuração rápida - Página 26

Procurar online ou descarregar pdf Manual de configuração rápida para Aparelho de fax Brother DCP120C - Flatbed Multifunction Photo Capture Center. Brother DCP120C - Flatbed Multifunction Photo Capture Center 33 páginas. Quick setup guide - french
Também para Brother DCP120C - Flatbed Multifunction Photo Capture Center: Manual de início rápido (33 páginas), Manual de configuração rápida (24 páginas), Lista de referência de peças (30 páginas), (Francês) Guide D'installation Rapide (Guia de instalação rápida) (24 páginas)

STEP2

Installing the Driver & Software

Carefully guide the network cable to the trench

as shown below, following the trench around

and toward the back of the machine.

Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

In case of using both USB and LAN cables, route

both cables through the trench.

Lift the scanner cover to release the lock.

Gently push the scanner cover support down

and close the scanner cover.

Turn on the machine by plugging in the power

cord.

Choose Network and then click OK.

If you want to use the machine's Scan key to scan

over the network you must check Register your

computer with the "Scan To" functions at the

machine box. You must also enter a name for

your Macintosh

in Display Name. The name

you enter will appear on the machine's LCD when

you press the Scan key and choose a scan

option. You can enter any name up to 15

characters long. (For more information on

network scanning, see Chapter 11 of the

Software User's Guide on the CD-ROM.)

Click Browse.

Choose your model name, and then click OK.

Click Go, then Applications.

Double-click the Utilities folder.

Macintosh