Fujitsu ETERNUS DX Disk Manual do utilizador - Página 32

Procurar online ou descarregar pdf Manual do utilizador para Servidor Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 42 páginas. Server connection, fcoe for linux driver settings for converged network adapter cards
Também para Fujitsu ETERNUS DX Disk: Manual do utilizador (35 páginas), Manual de configuração (28 páginas), Manual de configuração (44 páginas), Manual de configuração (28 páginas), Manual de configuração (29 páginas), Manual de configuração (25 páginas), Manual de configuração (32 páginas), Manual de configuração (35 páginas), Manual de configuração (31 páginas), Manual de configuração (43 páginas), Manual de configuração (21 páginas), Manual de configuração (24 páginas)

Fujitsu ETERNUS DX Disk Manual do utilizador
Chapter 6
Setting Up the VMware ESX Server
6.2
For VMware Infrastructure 3
6.2.3

Creating the Virtual Switches

Add two virtual switches (vSwitch) for iSCSI to VMware ESX.
Define two virtual network port types ("Service Console" and "VMkernel") for the added vSwitch.
Also assign IP addresses on the same subnet to the defined Service Console and VMkernel.
6.2.3.1
Adding a Service Console
1
Select the [Configuration] tab on VMware Infrastructure Client and click [Add Networking].
2
Select [Service Console] and click the [Next] button.
3
Select the checkbox of the target network adapter and click the [Next] button.
4
Check the [Service Console] details, set an arbitrary VLAN ID, IP address, and subnet mask, and click the
[Next] button.
5
Check the [Service Console] IP address and click the [Finish] button.
Confirm that the virtual switch (vSwitch1) has been created as follows.
6
Repeat
Step 1
6.2.3.2
Adding a VMkernel
1
Select the [Configuration] tab on VMware Infrastructure Client and select the target virtual switch' s
[Properties].
2
Click [Add].
3
Select the [VMkernel] radio button, and click the [Next] button.
4
Confirm that the VMkernel is displayed, set the IP address (an optional VLAN ID may be set, as necessa-
ry), and click the [Next] button.
5
Confirm the settings shown on the confirmation screen and click the [Finish] button.
A message about Gateway settings appears.
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
through
Step 5
to add Service Console to vSwitch2.
32
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0