Fujitsu FUTRO S5010 Manual de instruções - Página 30

Procurar online ou descarregar pdf Manual de instruções para Servidor Fujitsu FUTRO S5010. Fujitsu FUTRO S5010 36 páginas.

Operation

Switching off the device

► Shut down the operating system in the proper way. In Windows: from the

Start menu select the Shut Down option.

Device,

Monitor,

► If the operating system does not automatically switch the device into energy-saving mode or

switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!

If the device is switched off, it consumes a minimum of energy.

The ON/OFF switch does not disconnect the device from the mains voltage. To

completely disconnect the mains voltage, remove the power plug from the power socket.

► If necessary, switch the monitor off (see the operating manual for the monitor).

Due to customer requirements and requirements of the operating system, the

"Wake-on-LAN" (WoL) function is switched on by default. With the WoL function,

the power draw in OFF mode increases slightly.

To meet the requirements of EC regulation 1275/2008 regarding the implementation of the

Ecodesign directive (2009/125/EC), the default WoL setting must be changed as follows:

► To start the BIOS Setup utility after the system start, press the ON/OFF

switch for two to three seconds.

► Press the

► In the Power sub-menu, change the External Power Button Control, LAN and Keyboard to disabled.

► To save the setting and exit the BIOS Setup Utility, press function key

After making this change, the system will achieve the lowest energy

saving mode during shut-down.

In this status, the "Wake-on-LAN" function can no longer be used.

BIOS-Setup

► When the system starts, press the ON/OFF switch for two to three seconds.

► Press (possibly several times) the

BIOS Setup will be started. Select one of the tabs to access other setting options in BIOS Setup.

PXEsystem boot

► Switch the device on with the ON/OFF switch.

► When starting the system, press the

The boot menu is displayed.

► Select the desired boot option.

function key.

key.

F12

key several times.

Fujitsu