Fujitsu PRIMERGY SX940 Manual - Página 31

Procurar online ou descarregar pdf Manual para Servidor Fujitsu PRIMERGY SX940. Fujitsu PRIMERGY SX940 44 páginas.

Different configurations

Ê Plug the connector named P2 of the SAS cable into the connector on the

HDD diskbay 2/3 (4).

Ê Plug the power cable for the HDD 0/1 from connector J3 on main board #2

onto the connector J4 of main board #1.

Figure 17: Position of the jumper: Four HDDs using one LSI 1078 controller

Ê Plug the jumper (blue circle) on the HDD diskbay 2/3 from the position 1-2

(default) to 2-3 (upper two pins, see graphics).

CAUTION!

All unused cable ends have to be equipped with protective caps to avoid

short curcuits!

The second SAS cable stays unused in the housing. It has to be fixed by

a cable clamp.

SX940

Review

LSI 1078 controllers