Fujitsu PRIMERGY TX200 S7 Configurador de sistemas e manual de informações sobre encomendas - Página 10

Procurar online ou descarregar pdf Configurador de sistemas e manual de informações sobre encomendas para Servidor Fujitsu PRIMERGY TX200 S7. Fujitsu PRIMERGY TX200 S7 28 páginas. Dual socket intel xeon processor tower server
Também para Fujitsu PRIMERGY TX200 S7: Ficha de dados (10 páginas)

Imprimir página
C
S26113-F575-E10
2x
Power supply 450W
(hot plug)
occupies one bay for
hot plug power supply
max. 2x per system
For later upgrades the following kits are available:
1 power supply module 450W hot plug:
Supplementary module
1 power supply module 800W hot plug:
Supplementary module
Attention: There is no power cable included!
Std to Redundant Upgrade Kit
consisting of a redundant PSU cage and backplane
AND a 4th fan for fan redundancy
Does not contain any PSU module
II
Section
Processor
There are 2 processor sockets available.
The first socket is always equipped with the first CPU which can be selected via configurator
It is also possible to upgrade a dual-processor system later on with a second CPU
Two processors with different clock frequencies are not possible
A multi-processor operating system is required for a dual-processor system.
Max. two CPU`s can be selected per basic unit
One of following CPU´s has to be selected as first CPU
for an orderable basic unit
Optional second CPU has to be the same type like the first CPU
Basic 4C CPU's
- 1x 64-bit Intel Xeon (10MB shared TLC = Third Level Cache )
1066 MHz DDR3 Bus, 6,40 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2403 4C/4T 1.80GHz 10MB 6.40GT/s 1066MHz 80W
Xeon E5-2407 4C/4T 2.20GHz 10MB 6.40GT/s 1066MHz 80W
Standard Turbo 6C CPU's
- 1x 64-bit Intel Xeon (15MB shared TLC = Third Level Cache ); Hyper-Threading (HT);
1333 MHz DDR3 Bus, 7,20 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2420 6C/12T 1.90GHz 15MB 7.20GT/s 1333MHz 95W
Xeon E5-2430 6C/12T 2.20GHz 15MB 7.20GT/s 1333MHz 95W
Xeon E5-2440 6C/12T 2.40GHz 15MB 7.20GT/s 1333MHz 95W
Advanced Turbo+ 8C CPU
- 1x 64-bit Intel Xeon (20MB shared TLC = Third Level Cache ); Hyper-Threading (HT);
1600 MHz DDR3 Bus, 8,00 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2450 8C/16T 2.10GHz 20MB 8.00GT/s 1600MHz 95W
Xeon E5-2470 8C/16T 2.30GHz 20MB 8.00GT/s 1600MHz 95W
Low Power 6C CPU
- 1x 64-bit Intel Xeon (15MB shared TLC = Third Level Cache ); Hyper-Threading (HT);
1333 MHz DDR3 Bus, 7,20 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2430L 6C/12T 2.00GHz 15MB 7.20GT/s 1333MHz 60W
D
1x mandatory for redundant base units
there is only 1 PSU type allowed (450W or 800W)
S26113-F574-E10
Power supply 800W
(hot plug)
occupies one bay for
hot plug power supply
max. 2x per system
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX200 S7
*For order completeness only
Will be added automaticly with
System Architect Version ≥ V9.3
For redundant Base Units only
(V201, V401, V601 and V801)
For redundant floorstand versions only
(V201 and V401)
A second, redundant power supply requires an additional
country specific power cord (section XIII)
S26113-F575-L10
S26113-F574-L10
S26361-F3699-L1
Note: Max. DDR3 Bus Speed depends on:
S26361-F3684-E180
S26361-F3684-E220
S26361-F3723-E190
S26361-F3723-E220
S26361-F3723-E240
S26361-F3724-E210
S26361-F3724-E230
S26361-F3725-E200
Status 2014-01-30
- max. DDR3 Bus Speed from the CPU and
- max. DDR3 Memory Speed and
- max. memory modules on one memory channel
10 of 28