Fujitsu SPARC Enterprise M5000 Notas de produto - Página 25
Procurar online ou descarregar pdf Notas de produto para Servidor Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 44 páginas. Rci build procedure
Também para Fujitsu SPARC Enterprise M5000: Características Manual (30 páginas), Manual suplementar (36 páginas), Manual de iniciação (4 páginas)
Imprimir página
Software Issues
This section describes software specific issues and workarounds.
XCP Issues and Workarounds
TABLE 6
XCP Issues and Workarounds
TABLE 6
ID
Description
RTIF1-
While XSCF is running, a process may go
070418-009
down, a watchdog timeout may occur, or a
hang-up may occur. After this, XSCF may
reset.
RTIF1-
While XSCF is running, watchdog timeout
070528-002
may occur and XSCF may reboot.
RTIF1-
Using the XSCF Web, when you selected SSH
070823-001
on the snapshot screen, the maximum number
of character input for Host, Directory, ID, and
Password doesn't correspond to the maximum
number of character input on the XSCF Shell.
RTIF1-
When you display the Logical tree on the
070823-003
XSCF Web, the hardware configuration of
CPU or memory which assigned to the domain
appears differently from the actual domain
configuration.
RTIF1-
On the XSCF Web, when you select Domain
070824-002
Mode Configuration to perform various
settings, the pop-up screen may not appear but
"Undefined" may be displayed on the screen.
lists known XCP issues and possible workarounds.
Workaround
Check that XSCF is started. If not started, use
the rebootxscf(8) command to restart XSCF,
or stop all the domains and then execute the
system power off/on (AC OFF/ON). To turn
on the system power that you turned off, wait
at least 30 seconds before power-on.
Check that XSCF is started. If not started, use
the rebootxscf(8) command to restart XSCF,
or stop all the domains and then execute the
system power off/on (AC OFF/ON). To turn
on the system power that you turned off, wait
at least 30 seconds before power-on.
To specify the value which exceeds the
maximum number of character input for the
XSCF Web, use XSCF Shell.
On the Menu, select Device Status to refer to
the domain hardware configuration. Or use the
showdevices(8) command to refer to the
domain hardware configuration.
Select Domain Mode Configuration one more
time and perform the settings. Or once
terminate the XSCF Web and then perform the
settings.
SPARC Enterprise M4000/M5000 Servers Product Notes
15