2N EasyRoute Manual de configuração rápida - Página 2

Procurar online ou descarregar pdf Manual de configuração rápida para Porta de entrada 2N EasyRoute. 2N EasyRoute 3 páginas. Umts data and voice gateway
Também para 2N EasyRoute: Como fazer (6 páginas)

Imprimir página

5. If you have active on your SIM card

number of the SIM card. Do not forget SAVE all change, which you have done by clicking on

symbol floppy picture on the right bottom corner.

6. In menu SETUP

number. You should get those details with the SIM card from operator. If the APN is known in

the database of APN. 2N®EasyRoute will use this APN automatically.

7. Go to the menu STATUS. You can check here the router (GW) has been successfully logged in

to the network and the connection to the Internet is established. In menu STATUS you should

see status Internet: Connected. You can start browse on the Internet.

8. If you get status: Disconnected. Connect the EasyRoute by click on the symbol of the Circle

with arrow on the right bottom corner. Wait for a while, when the router (GW) will be

connected to the Internet. Status will change for Connected.

Tip: You can connect / disconnect the device from the Internet like that anytime you would

like.

9. Successfully login SIM card to the network is indicate by blinking of Yellow led diode.

Enable Wi-Fi

•

1. When Wi-Fi enable, we do recommend for your wireless network safety set up in menu

Wireless

You can choose from encryption codes as a (WEP, WPA, WPA2, WPA+WPA2). It is good to

know, which encryption does support your PC or Laptop. Most common encryption key are:

WEP and WPA. Choose encryption alphabet for the key: ASCII, HEX.

HEX= symbols which you can use are: (A-F, 0-9) - length for WEP key is 13 or 26 characters.

ASCII= all symbols from ASII table. Length for WEP key is 5 or 10 characters.

On all other keys (WAP, WAP2) is length of the password minimum of 8 characters.

2. Write the security KEY in the window.

3. You will be asked for this KEY (password), when you would like to be connected to the

2N®EasyRoute through Wi-Fi from your laptop/computer.

4. For leaving the configuration interface use the LOG OUT button on the left bottom corner.

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Internet (Point-to-Point Protocol), check the details of APN and Dial

→

Go to the menu SETUP

→

Tick box Enable and save it on right bottom corner (symbol of Floppy).

Wi-Fi is indicate by blinking green LED diode

Security password for Wi-Fi connection.

→

EasyRoute

, continue on menu SETUP

Wireless

CELULAR. Fill in the PIN

→