Brother MFC-410CN Manual de configuração rápida - Página 8
Procurar online ou descarregar pdf Manual de configuração rápida para Aparelho de fax Brother MFC-410CN. Brother MFC-410CN 37 páginas. Facsimile equipment
Também para Brother MFC-410CN: Lista de referência de peças (30 páginas)
Imprimir página
Step 1
Set Your Country
4
(For Australia / New
Zealand Customer Only)
Warning
You must set your country so that the machine works
correctly.
1
Check that the power is turned on (by
plugging in the power cord)
The LCD shows:
Set Country
Press Set Key
2
Press Menu/Set.
The LCD shows:
Australia
Select ▲ ▼ & Set
3
▲
Press
(AUSTRALIA or NEWZEALAND).
4
Press Menu/Set when the LCD shows your
country.
5
The LCD prompts you to make sure of the
country again
Australia?
1.Yes 2.No
6
Press 1 to go to step
---OR---
Press 2 to go back to step
country again.
7
After the LCD shows
seconds, it shows;
After about 30 seconds, the LCD shows:
Check Cartridge
8
Go to step 5 "Installing the lnk Cartridges".
6
Setting Up the Machine
▼
or
to select the country
7
.
1
to select the
for two
Accepted
Please Wait
Installing the Ink
5
Cartridges
Warning
If ink gets in your eyes wash them with water
immediately, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
2
Lift the scanner cover from the right-hand
side of the machine until it locks securely
into the open position.
Scanner Cover
3
Remove the protective parts.
Do not throw away the protective parts.
You will need them when you transport the
machine.