Fujitsu fi-5120C Começar a trabalhar - Página 14

Procurar online ou descarregar pdf Começar a trabalhar para Scanner Fujitsu fi-5120C. Fujitsu fi-5120C 28 páginas. Cleaning and consumable replacement instructions
Também para Fujitsu fi-5120C: Manual de procedimentos de instalação (7 páginas), Manual de procedimentos de instalação (9 páginas), Especificações (2 páginas), Manual de iniciação (29 páginas), Manual de instruções (13 páginas)

Imprimir página
Fujitsu fi-5120C Começar a trabalhar
4. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN>
appears.
This screen may not appear when the
ATTENTION
"Autoplay" setting of your PC is off. In this
case, run "Install.exe" in this CD-ROM directly
from the "Explorer" or "My Computer".
5. Click [INSTALL PRODUCTS].
6. Click [TWAIN Driver] on the window below.
7. Error Recovery Guide Installation window
appears.
Error Recovery Guide is a software that dis-
plays troubleshooting information on screen
when any scanner error occurs, and its installa-
tion is highly recommended. However, it can
be installed later if you do not install it in this
step.
When you select [Yes] for installing the Error
ATTENTION
Recovery Guide, [Choose Setup Language]
window appears. Select a language and fol-
low the instructions on the window. Error
Recovery Guide will automatically finish fin-
ishing its installation. Please wait until the
installation of TWAIN driver automatically
starts.
6
8. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
9. Install the application following the instructions
on the window.
10. When the [InstallShield Wiizard Complete] win-
dow appears, click [Finish].
Your computer will be restarted and the scanner will be
detected. Do not remove the Setup CD-ROM from the
CD drive until your PC has completely restarted.
Depending on the OS, these operations
ATTENTION
may be necessary.
For Windows 98:
When a request for inserting the CD-ROM
for Windows 98 appears, insert it into the
CD drive and click the [OK] button.
For Windows 2000:
When [Digital Signature not Found]
appears, click [Yes].
Now the installation of the scanner driver is completed.
To confirm whether the installation was
ATTENTION
successful, perform a scanning operation
with an application that complies with the
TWAIN regulations such as ScandAll 21.