Brother MFC-8460N Manual de configuração rápida - Página 9
Procurar online ou descarregar pdf Manual de configuração rápida para Aparelho de fax Brother MFC-8460N. Brother MFC-8460N 41 páginas. Scan to ftp (file transfer protocol)
Também para Brother MFC-8460N: Manual do utilizador (8 páginas), Manual de configuração (23 páginas), Manual (7 páginas), Manual de configuração rápida (37 páginas)
Imprimir página
Warning
■ The machine must be fitted with an earthed plug.
■ Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
If you are sharing one phone line with an
external telephone, connect it as shown
below.
(Example
for Australia)
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
(Example
for Australia)
Please set the receive mode to
TAD.
For more details, see "Connecting an
external TAD" in Chapter 7 of the User's
Guide.
5
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1
2
Extension
Telephone
External
Telephone
3
TAD
4
TAD
5
External
Set Your Country
(For Australia / New Zealand
Customer Only)
Check that the power is turned on by
plugging in the power cord and turn the
power switch on.
Press
or
to select the country
(AUSTRALIA or NEW Zealand).
Set Country
a Australia
b NEW Zealand
Select ab & OK
Press OK when the LCD shows your
country.
The LCD prompts you to make sure of the
country again.
Set Country
Australia
1.Yes
2.No
Enter Number
If the LCD shows the correct country, press
5
1 to go to Step
.
—OR—
Press 2 to go back to Step
country again.
After the LCD shows
Accepted
seconds, it shows
Please
2
to select the
for two
Wait.
7