Fujitsu FI-6130 Limpeza e manutenção - Página 28

Procurar online ou descarregar pdf Limpeza e manutenção para Scanner Fujitsu FI-6130. Fujitsu FI-6130 47 páginas. Color duplex workgroup scanners
Também para Fujitsu FI-6130: Manual de iniciação (20 páginas), Brochura e especificações (2 páginas), Manual de instruções (10 páginas), Começar a trabalhar (23 páginas), Instruções de limpeza (2 páginas)

Imprimir página
Fujitsu FI-6130 Limpeza e manutenção
Indication
J1
Paper jam
J2
Multifeed error

Cover Open, Print, and Other Errors

[U] and a number are displayed alternately.
Indication
U0
Transport lock error (fi-6230 only) Unlock the transport lock. For details refer to "2.1 Installing the
U4
The ADF opened during
scanning.
U5
The imprinter cover opened
during scanning.
(when imprinter option is
installed in fi-6130)
U6
The print cartridge of the
imprinter option (for fi-6130 only)
is not set.

Permanent Errors (device alarms)

Motor and Optical Systems

[E] and a number are displayed alternately.
Indication
E0
Flatbed motor malfunction
(fi-6230 only)
E1
Optical system error (Flatbed).
(fi-6230 only)
E2
Optical system error (ADF front).
E3
Optical system error (ADF back).
E6
Operator panel error
E7
Internal memory error (EEPROM)
E9
Image memory error

Overruning

[F] and a number are displayed alternately.
Meaning
1. Remove the halted or jammed document remaining inside.
2. Confirm that the documents meet the paper conditions for
Pressing the [Send to] button on the Operator Panel ejects the
mutifed document.
Meaning
Scanner" in "fi-6130/fi-6230 Getting Started."
Close the ADF completely and load the document again.
This is a temporary error related with the Imprinter option (sold
separately). For details refer to "614PR Imprinter Operator's Guide."
Meaning
If the alarm is still displayed on the Function Number Display, record
the indicated error code, and contact the store where you purchased
the scanner or an authorized FUJITSU scanner service provider.
When you encounter any alarm on the display, turn the scanner off
and on. If the alarm is still displayed on the Function Number
Display, record the indicated error code, and contact the store where
you purchased the scanner or an authorized FUJITSU scanner
service provider.
Remedy
For how to remove such documents, see Section
Removing Jammed
Documents."
scanning from the ADF. For details see Chapter

SPECIFICATIONS."

Remedy
1. Confirm that the transfer lock is released.
2. When a device alarm is indicated, turn off and on the scanner.
"6.1
"7 ADF AND
Remedy