Brother MFC-890 Manual de configuração rápida - Página 8

Procurar online ou descarregar pdf Manual de configuração rápida para Aparelho de fax Brother MFC-890. Brother MFC-890 35 páginas. Brother multifunction printer quick setup guide
Também para Brother MFC-890: Lista de referência de peças (24 páginas)

Imprimir página

Step 1

Gently insert the black ink cartridge in the

black ink position.

Press the cover down until it clicks.

Repeat Steps 5 to 8 to install each colour ink

cartridge. Match the colours of the ink

cartridge covers.

Close the scanner cover. The machine will

enter a head cleaning cycle for

approximately six minutes.

CLEANING

PLEASE WAIT

Setting Up the machine

• DO NOT remove ink cartridges if

you do not need to replace them. If

you do so, it may reduce the ink

quantity and the machine will not

know the quantity of ink left in the

cartridge.

• DO NOT shake the ink cartridges. If

you do so, the ink may spill when

you take off the sealing tape. If ink

stains your body or clothing, wash

with soap or detergent

immediately.

• DO NOT refill the ink cartridges.

Attempting to use refilled

cartridges and using incompatible

inks may cause damage to the print

head in this machine and such

damage will not be covered by

warranty. Warranty coverage does

not apply to problems caused by

the use of 3rd party ink or 3rd party

ink cartridges. Use only genuine

Brother ink cartridges.

If you mix the colours by installing an ink

cartridge in the wrong colour position, you

must clean the print head several times

after correcting the cartridge installation

and before you start printing.

Once you open an ink cartridge, install it in

the machine and use it up within six

months of installation. Use unopened ink

cartridges by the expiration date written

on the cartridge package.

shows on the LCD after you

INK EMPTY

install the ink cartridges, check to make

sure the ink cartridges are installed

correctly.