Fujitsu fi-8190 Manual do operador - Página 21

Procurar online ou descarregar pdf Manual do operador para Scanner Fujitsu fi-8190. Fujitsu fi-8190 47 páginas. Image scanner
Também para Fujitsu fi-8190: Começar a trabalhar (2 páginas), Começar a trabalhar (2 páginas)

Imprimir página
Fujitsu fi-8190 Manual do operador

For fi-8150/fi-8150U

1
Turn off the scanner if it is on.
2
On the operator panel, hold down the [Function] button and press the [Power] button.
Keep holding down the [Function] button.
3
When "b" is displayed after "P" in the Function Number Display, release the [Function] button.
4
Load blank documents in the scanner.
When you load one blank document, you can check the result of Print Pattern 1 only.
Load multiple blank documents to check the results of some print patterns.
For details about print patterns, refer to
HINT
● Use an A4 or Letter size blank sheet.
If the paper size is smaller than A4 or Letter, printing may not complete successfully.
● Make sure that the print cartridge holder is positioned within the document width.
5
Press the [Scan/Stop] button.
One blank sheet is fed into the scanner, and the imprinter will print out a print pattern leaving a 5 mm gap
(with an allowance of 4 mm inwards or outwards) from the edge of the document.
Print Patterns and the Results (page
21
Installation
22).