Fujitsu PA03541-B105 Manual de iniciação - Página 22

Procurar online ou descarregar pdf Manual de iniciação para Scanner Fujitsu PA03541-B105. Fujitsu PA03541-B105 38 páginas. Color image scanner

• Be sure to use the supplied USB bus power cable.

ATTENTION

• Be sure to use the supplied USB cable.

• If only the USB cable is used, the ScanSnap does not operate. Be

• When connecting to a USB hub, be sure to use the first stage USB

• When connecting with a USB 2.0 cable, make sure that the USB port

■ Turning the ScanSnap ON

ATTENTION

Open the Paper chute of the ScanSnap.

The ScanSnap is turned ON.

⇒

The Power indicator starts blinking, and becomes solid. Then, the ScanSnap is

recognized as new hardware by your computer.

HINT

The operation with any commercially available USB cable is not

guaranteed.

sure to use two types of cables, the USB bus power and USB, to

connect the ScanSnap to your computer.

Or, use a powered hub equipped with an AC adapter, and connect

both cables to the same hub.

hub that is closest to the computer. If you use the second or later hub

stages, the ScanSnap may not operate properly.

to connect to and hub must be USB 2.0-compliant. Note that if

connected with a USB 1.1 cable, the scanning speed may become

slow. When a USB 2.0-compliant port is available, it is recommended

that the USB 2.0-compliant port be used.

The ScanSnap is turned on/off automatically, when you open/close the

Paper chute.

It is also turned on/off in conjunction with the connected computer's

power on/off status.

Depending on the performance of the computer and the load on it, it may

take time before the power LED gets illuminated. For example, it may

take time if there are many programs running on the computer.

In such case, wait until the power LED is steadily on.

Paper chute