Fujitsu ETERNUS DX Disk Manual de configuração - Página 10

Procurar online ou descarregar pdf Manual de configuração para Armazenamento Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 31 páginas. Server connection, fcoe for linux driver settings for converged network adapter cards
Também para Fujitsu ETERNUS DX Disk: Manual do utilizador (35 páginas), Manual do utilizador (42 páginas), Manual de configuração (28 páginas), Manual de configuração (44 páginas), Manual de configuração (28 páginas), Manual de configuração (29 páginas), Manual de configuração (25 páginas), Manual de configuração (32 páginas), Manual de configuração (35 páginas), Manual de configuração (43 páginas), Manual de configuração (21 páginas), Manual de configuração (24 páginas)

Imprimir página
Fujitsu ETERNUS DX Disk Manual de configuração
Chapter 3
Notes
3.3

SAS Card Driver Notes

3.3
SAS Card Driver Notes
When the same type of chip is used for both the SAS card and the server's onboard RAID or RAID card, the
•
driver installed for the SAS card may also control the onboard RAID or RAID card.
Contact the server vendor for details of how each onboard RAID or RAID card is affected by the SAS card
driver.
The ETERNUS Multipath Driver supports path redundancy control (path fail-over).
•
For product information, refer to the following URL:
http://www.fujitsu.com/global/products/computing/storage/software/eternus-mpd/
3.4

Notes about Driver for ETERNUS DX Storage Systems

When connecting the server to the ETERNUS DX with multipath configuration, using the path redundancy
control (path fail-over) function with a driver for ETERNUS DX storage systems, one of the following drivers is
required by the server:
OS
Windows Server
Windows Server
Windows Server
Windows Server
Windows Server
Windows Server
For product information, refer to the following URL:
http://www.fujitsu.com/global/products/computing/storage/software/eternus-mpd/
Even when single-path connection is used between the ETERNUS DX and server, an ETERNUS DX compatible
driver (ETERNUS device driver) is not required.
3.5

MSCS and WSFC Notes

To use MSCS or WSFC configuration, install either the driver for ETERNUS DX storage systems or the stand-
•
ard multipath driver (msdsm) for Windows Server
Windows Server
then check the connections before MSCS or WSFC installation.
Check the registry values by following the instructions in
•
(page
25), after installing MSCS or WSFC.
When setting up the MSCS, a reset group must be set for the ETERNUS DX. A reset group does not need to
•
be set for WSFC.
®
2019
®
2016
®
2012 R2
®
2012
®
2008 R2
®
2008
®
2012, Windows Server
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
Driver
ETERNUS Multipath Driver
®
2019, Windows Server
®
2008 R2 or Windows Server
"Chapter 8 Checking the Registry Information"
10
®
2016, Windows Server
®
2008 on each node (server), and
®
P3AM-3442-18ENZ0
®
2012 R2,