Fujitsu ETERNUS DX100 S3 Manual de configuração - Página 13

Procurar online ou descarregar pdf Manual de configuração para Armazenamento Fujitsu ETERNUS DX100 S3. Fujitsu ETERNUS DX100 S3 28 páginas. Hybrid storage systems, all-flash arrays, power synchronized unit
Também para Fujitsu ETERNUS DX100 S3: Manual de configuração Ligação do servidor (12 páginas), Manual de configuração Ligação do servidor (12 páginas), Manual de configuração (13 páginas), Manual de configuração (15 páginas), Precauções de segurança (12 páginas)

Chapter 4

Checking the Server Information

The server information registered in the ETERNUS DX should be checked.

A variety of commands are used to check the following server information.

iSCSI initiator name

•

Execute the following command:

iscsiutil -l

The iSCSI initiator name is displayed in the "Initiator Name" column.

Server-side LAN card IP address for connecting to the ETERNUS DX

•

Execute the following command:

ifconfig

Set this IP address if it is not already set.

Initiator CHAP Name

•

The Initiator CHAP Name is the user name for unidirectional CHAP authentication. Execute the following

command:

This is not required if CHAP authentication is not used.

iscsiutil -pD

The Initiator CHAP Name is displayed in the "Initiator CHAP Name" column of the applicable target infor-

mation.

CHAP Secret

•

The CHAP Secret is the password for unidirectional CHAP authentication. Execute the following command:

This is not required if CHAP authentication is not used.

iscsiutil -pD

The CHAP Secret is displayed in the "CHAP Secret" column of the applicable target information.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

P3AM-3402-14ENZ0