Fujitsu ETERNUS DX8100 S3 Precauções de segurança - Página 3
Procurar online ou descarregar pdf Precauções de segurança para Armazenamento Fujitsu ETERNUS DX8100 S3. Fujitsu ETERNUS DX8100 S3 12 páginas. Hybrid storage systems, all-flash arrays, power synchronized unit
Também para Fujitsu ETERNUS DX8100 S3: Manual de configuração (18 páginas)
Imprimir página
CAUTION
•
Do not use this device in an area affected by
Do Not
corrosive gas or in a salty environment. Doing
so may cause device failure.
•
Do not knock or place heavy objects on this
device or optional products. Doing so may
cause injury or damage this device.
•
Do not place this device in areas with strong
magnetic fields, such as in the vicinity of TVs
or speakers. Doing so may damage this device
and cause this device to malfunction.
•
Do not place power cords and other cables in
locations where they may become trip
hazards. Doing so may cause injur y or
damage this device.
•
Do not place this device on a slanted or
unstable surface or in areas that tend to
shake. Doing so may cause it to tip over and
injure others. Also, do not place this device in
high traffic areas such as in a hallway.
Passersby can shake this device, damage it or
cause malfunction.
•
Place this device in an environment in which
Do
the temperature and humidity satisfy the
environmental conditions described in the
manuals of the devices that are being used.
-
For 24-hour operation, ensure that the
schedule for air conditioning is able to
maintain the required temperature.
Failure to do so may cause device failure.
-
During the winter, control the heating
system to limit ambient temperature rises
to less than 15°C per hour to prevent
condensation. Failure to do so could lead
to electric shock and damage this device.
Handling instructions
WARNING
•
Do not attempt to repair, disassemble, or
No Disassembly
remodel this device by yourself. Doing so may
cause electric shock and/or fire.
•
Do not use this device with a voltage other
Do Not
than that indicated. Doing so may cause
electric shock and/or fire.
•
Do not handle the power plug with wet hands.
Doing so may cause electric shock.
•
Do not wind power cords too tightly at the root
of the power cord. Doing so stresses the cords
and may expose or snap the inner wires,
which can lead to electric shock and/or fire.
•
Do not damage or modify the power cord or
Do Not
the power plug. Heating, forced bending,
twisting, pulling, or placing heavy objects on
the power cord will damage it, causing electric
shock and/or fire.
•
Do not plug all the power cords into a single
outlet. Doing so may cause electric shock and/or
fire.
•
Do not use a power cord other than the one
provided with this device or a specified power
c o r d . A l s o , d o n o t u s e t h e p re v i o u s l y
mentioned power cord with other devices.
Doing so may cause electric shock, fire, or
device failure.
•
Do not use any products other than the
optional products for this device. Doing so may
cause electric shock, fire, or device failure.
•
Do not insert or drop foreign objects such as
metals or flammable objects into openings in
this device such as air vents. Doing so may
cause electric shock, fire, or device failure.
•
Do not obstruct the openings in this device
such as air vents. Doi ng so may cause
overheating that leads to fire and device
failure.
•
Do not use any flammable type cleaning
sprays. Doing so may cause fire or device
failure.
•
Do not place optional products in locations
subject to direct sunlight, humidity, near a
heating appliance or anything that may cause
a fire. Doing so may damage the optional
products and cause them to malfunction.
•
Use only power sockets that have a ground.
Do
Failure to do so may cause electric shock, fire,
or malfunction.
•
Turn off the power of this device and
disconnect the power plug from the socket
during thunderstorms. Failure to do so may
lead to electric shock, fire, or device failure.
•
Ensure the power plug is fully inserted into the
socket. Failure to do so may cause electric
shock and/or fire.
•
Attach a caution tag around the breaker
during the maintenance procedure for the
power supply unit.
Attaching a caution tag keeps the operator
safe and may prevent a shutdown due to
incorrect operations.
•
Install optional products by following the
instructions described in the manuals of the
devices that are being used. If an optional
product is installed in any other way, device
failure or electric shock may occur.
•
When carrying this device, two or more
(appropriate numbers) people should hold
both sides as well as the bottom of it. Carrying
a heavy device without two or more people
may cause injury. Also, be sure not to catch
your fingers in the rack. Failing to do so may
cause injury.