Fujitsu ETERNUS8000 1100 Manual de ligação do servidor - Página 14

Procurar online ou descarregar pdf Manual de ligação do servidor para Armazenamento Fujitsu ETERNUS8000 1100. Fujitsu ETERNUS8000 1100 25 páginas. Disk storage systems (fibre channel) for oracle solaris
Também para Fujitsu ETERNUS8000 1100: Manual (28 páginas), Manual (21 páginas), Manual de ligação do servidor (32 páginas), Manual de ligação (19 páginas)

Imprimir página

Fujitsu ETERNUS8000 1100 Manual de ligação do servidor

Chapter 5 Setting Up the Linux Server

5.2 Setting Up Automatic iSCSI Service

5.2

Setting Up Automatic iSCSI Service

YaST is used to set up the iSCSI service. Refer to the Novell web-site for details of the setup pro-

cedure.

Procedure

5.3

Setting Up the Network Environment

Set the IP information (IP address and subnet mask) of the LAN card.

5.4

Checking the iSCSI Initiator Name

Check which iSCSI initiator name is described as the default in the "/etc/iscsi/initiatorname.iscsi"

file.

This iSCSI initiator name should be used for the ETERNUS Disk storage system settings.

P3AM-4152-02ENZ0

ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux

(SUSE Linux Enterprise Server)

Start YaST and then run the iSCSI Initiator in Miscellaneous.

The iSCSI Initiator Overview window appears.

In the iSCSI Initiator Overview window, open the Service tab and select "When

Booting".

Set the same subnet as that set for the ETERNUS Disk storage system

LAN card.

For details of the ETERNUS Disk storage system settings, refer to

7 Setting Up the ETERNUS Disk Storage Systems" (page

End of procedure

"Chapter

16).