Fujitsu ETERNUS8000 2200 Manual - Página 13

Procurar online ou descarregar pdf Manual para Armazenamento Fujitsu ETERNUS8000 2200. Fujitsu ETERNUS8000 2200 21 páginas. Disk storage systems (fibre channel) for oracle solaris
Também para Fujitsu ETERNUS8000 2200: Manual (28 páginas), Manual de ligação do servidor (25 páginas), Manual de ligação do servidor (32 páginas), Manual de ligação (19 páginas)

Imprimir página

Chapter 3 Setting Up MPxIO

3.2 Solaris 9 OS

3.2.2

Checking the Storage System Status

Use the "format" command to check the path status before multipathing is set up (example out-

put follows).

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>

/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0113ce2e1,0

1. c2t2051000B5D6A0109d0 <FUJITSU-E8000-0000 cyl 6248 alt 2 hd 64 sec 256>

/pci@9,600000/SUNW,qlc@1,1/fp@0,0/ssd@w2051000b5d6a0109,0

2. c3t2050000B5D6A0109d0 <FUJITSU-E8000-0000 cyl 6248 alt 2 hd 64 sec 256>

/pci@9,600000/SUNW,qlc@2,1/fp@0,0/ssd@w2050000b5d6a0109,0

3.2.3

Editing the "/kernel/drv/scsi_vhci.conf" Settings

Edit the "/kernel/drv/scsi_vhci.conf" file.

Procedure

P3AM-2722-04ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

Enable MPxIO.

Check that an "mpxio-disable="no";" line exists, enabling MPxIO.

Otherwise, add this line or change its value to "no".

Enable the auto-failback function.

Check that an "auto-failback="enable";" line exists, enabling the auto-failback function.

Otherwise, add this line or change its value to "enable".

"d0" device is connected to c2 and c3 paths.