Brother MFC-J265W Manual do utilizador - Página 21
Procurar online ou descarregar pdf Manual do utilizador para Servidor de impressão Brother MFC-J265W. Brother MFC-J265W 49 páginas. Quick setup guide - spanish
Também para Brother MFC-J265W: Manual de instalação (35 páginas), Manual do utilizador avançado (50 páginas), Manual de configuração rápida (33 páginas), (Inglês) Guia de configuração rápida (35 páginas)
Imprimir página
Setting up groups for
broadcasting
Groups, which can be stored in a Speed Dial
location, allow you to send the same fax
message to many fax numbers by pressing
only
(Speed Dial), Search, OK,
the two-digit location and Mono Start.
First, you'll need to store each fax number in
a Speed Dial location. Then you can include
them as numbers in the Group. Each Group
uses up a Speed Dial location. You can have
up to six Groups, or you can assign up to
39 numbers in a large Group.
(See Broadcasting (Monochrome only)
on page 8 and Storing Speed Dial numbers in
chapter 7 in the Basic User's Guide.)
a
Press
(Speed Dial).
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
d
Press a or b to choose the two-digit
Speed Dial location you want to add to
the Group.
Press OK.
e
Press a or b to choose Add Number.
Press OK.
f
To add numbers to the group, press
a or b to choose
Alphabetical Order or
Numerical Order and OK. Press
a or b to select a number and OK.
Dialling and storing numbers
g
Do one of the following:
To add another number to the group,
5
repeat steps e to f.
If you are finished adding numbers to
the group, press a or b to choose
Complete.
Press OK.
h
Do one of the following:
To store another Group for
broadcasting, repeat steps c to g.
To finish storing Groups for
broadcasting, press Stop/Exit.
Note
You can print a list of all the Speed Dial
numbers. Group numbers will be marked
in the GROUP column. (See Reports
on page 18.)
5
15