Brother MFC-J4310DW Manual de configuração rápida - Página 33

Procurar online ou descarregar pdf Manual de configuração rápida para Servidor de impressão Brother MFC-J4310DW. Brother MFC-J4310DW 47 páginas. Air print guide - spanish
Também para Brother MFC-J4310DW: Manual (36 páginas), Manual (22 páginas), Manual de Segurança do Produto (17 páginas), Manual (13 páginas), Manual (13 páginas), Manual de Segurança do Produto (20 páginas), (Espanhol) Guia De Web Connect Manual (38 páginas), (Espanhol) Manual (24 páginas), (Inglês) Manual do Guia de Segurança do Produto (16 páginas), (Espanhol) Manual (12 páginas), (Espanhol) Manual (11 páginas)

For Wireless Network Users

Enter the Network Key you wrote down in

step 18-a on page 29, and then click Next.

NOTE

If your network is not configured for

Authentication and Encryption, the following

screen will appear. To continue configuration,

click OK and go to j.

Click Next. The settings will be sent to your

machine.

NOTE

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• If the wireless setup failure screen appears,

click Retry.

Disconnect the USB cable between the

computer and the machine.

Click Next to continue to install MFL-Pro Suite.

Wireless setup is now complete. The

Wi-Fi button at the upper right of the

Touchscreen changes to a four-level

indicator that displays the wireless signal

strength of your access point/router.

The Wi-Fi LED

lights up, indicating that the machine's

Network I/F is set to WLAN.

To install MFL-Pro Suite

For Windows

users:

Now go to

Step 21-e on page 39

For Macintosh users:

Now go to

Step 21-d on page 41

on the control panel