AEG FRIDGE-FREEZER Folheto de instruções - Página 5
Procurar online ou descarregar pdf Folheto de instruções para Frigorífico AEG FRIDGE-FREEZER. AEG FRIDGE-FREEZER 10 páginas. Aeg fridge-freezer
Também para AEG FRIDGE-FREEZER: Folheto de instruções (10 páginas), Manual do utilizador (28 páginas)
Imprimir página
Door reversibility
Before carrying out any work, remove the plug
from the power socket.
To change the opening direction of the doors
proceed as follows:
Remove the clip-in ventilation grille (D).
Remove the bottom hinge (E) by unscrewing the
two fixing screws.
Slide the bottom door off the centre hinge (B).
Remove the centre hinge and slide the top door off
pin (5); unscrew pin (5) and refit it on the opposite
side.
Remove the two plugs, to reveal the holes for the
hinge pivots, and remount them on the other side.
Refit the top door and the centre hinge (H) on the
opposite side.
Refit the bottom door.
Refit bottom hinge (E) on the opposite side, using
the two screws previously removed.
Remove blanking cover (F) from ventilation grille
(D) by pushing it in the direction of the arrow and
refit it on the opposite side.
Refit ventilation grille (D), clipping it into place.
Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch. Cover
the holes left open with the plugs contained in the
documentation pack.
Attention
After completion of the door reversibility operation,
verify that the door gasket is adherent to the
cabinet. If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of
the gasket or accelerate this process by heating up
the part involved with a normal hairdrier.
E
F
D
F
D640
D548
H
D405
PR228
Fig. 3
F
F
Fig. 4
5
Fig. 5
Fig. 6
29