Brother MFC 3360C - Color Inkjet - All-in-One Manual de configuração rápida - Página 11
Procurar online ou descarregar pdf Manual de configuração rápida para Software Brother MFC 3360C - Color Inkjet - All-in-One. Brother MFC 3360C - Color Inkjet - All-in-One 23 páginas. Windows vista
Também para Brother MFC 3360C - Color Inkjet - All-in-One: Manual de configuração rápida (24 páginas), Manual de configuração (23 páginas)
Imprimir página
8
Print quality check
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
q
Press Start
2
Make sure paper is loaded in the paper tray.
Press Colour Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3
Check the quality of the four colour blocks on
the sheet.
(black/ yellow/ cyan/ magenta)
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
q
1.Yes 2.No
5
Do one of the following:
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step 6.
OK
6
7
8
9
You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty seeing
the LCD from your position, we recommend changing
the contrast setting for improved viewing.
1
2
3
4
Poor
Setting Up the Machine
The LCD asks you if the print quality is OK for
black and colour. Press 1 (Yes) or 2 (No) on the
dial pad.
Black OK?
q
1.Yes 2.No
Color OK?
q
1.Yes 2.No
After pressing 1 (Yes) or 2 (No) for both black
and colour, the LCD shows:
Start Cleaning?
q
1.Yes 2.No
Press 1 (Yes), the machine will then start
cleaning the colours.
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
Setting the LCD contrast
Press Menu, 1, 7.
Press a or b to choose Dark or Light.
Press OK.
Press Stop/Exit.
Contrast:Light
9