Fujitsu fi-748PRB Manual do operador - Página 13
Procurar online ou descarregar pdf Manual do operador para Impressora Fujitsu fi-748PRB. Fujitsu fi-748PRB 20 páginas. Imprinter
Também para Fujitsu fi-748PRB: Manual de serviço (18 páginas)
Imprimir página
8.
Move the print cartridge to an appropriate
printing position.
The print cartridge should be positioned within the section
where the document will pass through.
ATTENTION
When printing close to the document edge, be careful of the
position of the print cartridge because printing may be made
outside the document.
9.
Close the print cartridge cover.
10. Turn on the scanner.
11. Reset the ink counter in the following procedure.
ATTENTION
Make sure to reset the ink counter after replacing the print
cartridge.
① Display the [Software Operation Panel] window.
Windows Server 2008 R2/Windows 7
Click [Start] menu → [All Programs] → [fi Series] →
[Software Operation Panel].
Windows Server 2012
Right-click the Start screen, and select [All apps] on
the app bar → [Software Operation Panel] under [fi
Series].
Windows Server 2012 R2/Windows 8.1
Click [↓] on the lower left side of the Start screen and
select [Software Operation Panel] under [fi Series].
To display [↓], move the mouse cursor.
Windows 10/Windows Server 2016/Windows
Server 2019/Windows Server 2022
Click [Start] menu → [fi Series] → [Software
Operation Panel].
Windows 11
Click [Start] menu → [All apps] → [fi Series] →
[Software Operation Panel].
② Click [Device Setting] from the list on the left, and
then click the [Clear] button of [Remaining Ink].
The value of the counter is set to 100.
③ Click the [OK] button on the [Software Operation
Panel] window.
④ A message appears. Click the [OK] button.
The [Software Operation Panel] window closes, and
the ink counter is cleared.
fi-748PRB Imprinter Operator's Guide | 11