AEG RCB732E7MG Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Frigorífico AEG RCB732E7MG. AEG RCB732E7MG 32 páginas.

• Before using your fridge freezer, wipe all parts with a solution of warm water and a

teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts

to the fridge freezer after cleaning.

• Install the two plastic distance guides (the parts on the black vanes

-condenser- at the rear) by turning it 90° (as shown in the figure) to

prevent the condenser from touching the wall.

• If you position the appliance against a wall in a freestanding installation,

install the rear spacers in order to guarantee the maximum possible

distance

Before Using your Fridge

• When using your fridge for the first time, or after transportation, keep it

in an upright position for at least 3 hours before plugging into the mains.

This allows efficient operation and prevents damage to the compressor.

• Your fridge may have a smell when it is operated for the first time. This is

normal and the smell will fade away when your fridge starts to cool.

Internal lighting

WARNING!

Risk of electric shock.

• Concerning the lamp(s) inside this product and spare part lamps sold separately: These

lamps are intended to withstand extreme physical conditions in household appliances,

such as temperature, vibration, humidity, or are intended to signal information about the

operational status of the appliance. They are not intended to be used in other applications

and are not suitable for household room illumination.

Warning! This appliance must be earthed.

The mains lead of this appliance has been fitted with a specially earthed plug.

Important: Do not use the appliance without the fuse cover in position. Should the

fuse need to be replaced, it must be replaced with a 13A fuse, ASTA approved to BS1362.

The plug must be used with a specially earthed socket of 13 amperes. If there is no such

socket in your house, please have one installed by an authorised electrician.

The mains lead of this appliance has been fitted with a BS

1363A 13A fused plug. To change a fuse in this type of plug,

follow the steps below:

1. Remove the fuse cover and fuse.

2. Fit replacement 13A fuse, ASTA approved to BS 1362 type,

into the fuse cover.

3. Replace fuse cover.

EN -12-