Brother Quattro 2 6700D Manual de operação - Página 7
Procurar online ou descarregar pdf Manual de operação para Software Brother Quattro 2 6700D. Brother Quattro 2 6700D 50 páginas. Kit para crear efectos decorativos con bobinas
Também para Brother Quattro 2 6700D: Manual de operação (16 páginas), Manual de instruções (40 páginas), (Inglês) Manual de instruções (16 páginas)
Imprimir página
2
Insert the USB media containing the application into
the primary (top) USB port on the right side of the
machine.
Caution
•
Do not insert anything other than USB media into the
USB media port. Otherwise, the USB media drive may
be damaged.
•
Do not insert USB media containing pattern data other
than those saved using this application. (Only .pm7 and
.phc data can be used.)
3
Turn on the sewing machine.
4
Press the opening screen. A screen that allows you
to select the application or sewing machine, like what
is shown at the left, appears.
*
If USB media that does not contain the application is
inserted, the home screen appears.
5
Press the icon for the application. My Custom Design
starts up.
Caution
Do not turn off the machine or remove the USB media while
the application is starting up, otherwise the USB media may
be damaged.
Notes
•
If you have turned off the sewing machine while embroidering,
previously embroidered pattern will not be recalled when you turn
on the machine again.
Closing the Application
1
To close My Custom Design, turn off the sewing
machine.
To close the application to use the sewing machine,
press
Notes
•
When the application is closed, the currently displayed data is
deleted. Be sure to save any necessary data before closing the
application.
. (Refer to page 46.)
7