Brother RuggedJet RJ-4040 Manual de Segurança do Produto - Página 10

Procurar online ou descarregar pdf Manual de Segurança do Produto para Software Brother RuggedJet RJ-4040. Brother RuggedJet RJ-4040 22 páginas. Mobile printer
Também para Brother RuggedJet RJ-4040: Manual de referência rápida (2 páginas), Manual do utilizador (33 páginas), Manual do software (48 páginas), Manual de referência rápida (1 páginas), Manual do utilizador (34 páginas)

DO NOT wind the AC adapter or Car adapter cable around the adapter or bend the cable, otherwise

the cable may be damaged.

DO NOT overload electric outlets or plug multiple devices into the same electric outlet. There is a

risk of fire, electric shock, and damage.

DO NOT use damaged plugs or bent electric outlets. There is a risk of fire, electric shock, and

damage.

Printer

Keep out of the reach of children, particularly infants, otherwise injury may result.

Stop operating the printer if it leaks or becomes discolored, deformed, or otherwise defective.

DO NOT hold the printer by the RD Roll compartment cover. There is a risk of injury if the cover

detaches and the printer falls.

When connecting cables and accessories, make sure they're connected correctly and in the correct

order. Only connect items that are designed specifically for this printer. There is a risk of fire or

injury. Refer to the instructions when connecting.

DO NOT directly touch the printer continuously for prolonged periods while the power is turned on.

Touching hot components directly for prolonged periods may cause low temperature burns.

Tear bar

DO NOT touch the tear bar directly, otherwise injury may result.

AC adapter/Car adapter (Optional)

Make sure that the AC adapter's power cord or the Car adapter is accessible so that it can be

removed in an emergency. DO NOT place objects on or near the AC adapter's power cord or the

Car adapter's cord.

Belt clip

Make sure that the screw is tightened securely. There is a risk of injury if the screw is loose and the

printer falls.

Make sure that the belt clip is attached securely to the printer. There is a risk of injury if the belt clip

is not attached securely and the printer falls.

Make sure that the belt clip is attached securely to the wearer's belt. There is a risk of injury if the

belt clip is not attached securely and the printer falls.

RD Roll

Be careful not to drop the RD Roll.

The RD Roll uses thermal paper, therefore the color of the label and the printing may change or

fade if exposed to sunlight or heat. When using outdoors and when durability is important, we DO

NOT recommend using the RD Roll.

Depending on the area, material, and environmental conditions, the label may unpeel or become

permanently affixed, and the color of the label may change or be transferred to other objects. Before

affixing the label, check the environmental conditions and the material. Test the label by affixing a

small piece of it to an inconspicuous area of the intended surface.

WARNING

CAUTION