Fujitsu Lifebook T4010D Manual - Página 21

Procurar online ou descarregar pdf Manual para Tablet Fujitsu Lifebook T4010D. Fujitsu Lifebook T4010D 23 páginas. Pc
Também para Fujitsu Lifebook T4010D: Bios Manual (30 páginas)

Imprimir página

T Series.book Page 28 Wednesday, July 28, 2004 3:35 PM

L i f e B o o k T S e r i e s T a b l e t P C - S e c t i o n T w o

4. Using the pen, firmly touch the screen directly on

the (+) symbol; the (+) symbol will move to the

next location.

5. Repeat step 4 in the four corners, then click OK.

REPLACING THE PEN TIP

With use, the pen tip may become worn or may pick up

foreign particles that can scratch the screen. A damaged

or worn tip may not move freely, causing unpredictable

results when using the pen. If your pen exhibits these

problems, you should replace the pen tip. To do so, use

the pen tip removal tool included with your pen.

Figure 2-25. Tip Removal Tool

To remove the tip, position the tip in the gap between

the two ends of the tool (Figure 2-25). Pinch the tool

together so the tip is firmly clasped, then pull it from the

barrel. If the tip is worn or damaged, discard it.

To replace the tip, retrieve one of the new tips that

accompanied your pen. Insert the flat end of the tip into

the barrel and push it in firmly until it is seated.

If you need more tips, they can be ordered from the

Fujitsu Web site at: us.fujitsu.com/computers.

USING THE ACTIVE DIGITIZER

The integrated active digitizer allows you to use the

included pen as a pointing device. You can use the pen

to click, double-click, drag items and icons, or to draw

like a pen or pencil in applications that support this

behavior, such as drawing or painting programs. See the

documentation that came with your application for

details. (Figure 2-26)

Figure 2-26. Using the pen with the screen

To avoid potential scratching and damage,

never use anything but the included pen

with the display.

To purchase additional or replacement

pens, visit the Fujitsu accessories Web site

at: http://us.fujitsu.com/computers.

Clicking

To left-click, touch the object you wish to select and then

lift the pen tip immediately. (Figure 2-27)

To right-click, press the front button on the barrel

switch or touch the pen to the screen for a couple of

seconds until the right mouse icon appears at the tip.

Gap

Figure 2-27. Clicking the screen

Double-Clicking

To double-click, touch the item twice, and then immedi-

ately remove the pen tip. (Figure 2-28)

Figure 2-28. Double-clicking the screen

If the interval between taps is too long,

the double-click will not be executed.

Parameters for the screen can be

adjusted from the Mouse Properties dia-

log box located in the Windows Control

Panel.