Brother ADS-2600We Manual de início rápido - Página 17

Procurar online ou descarregar pdf Manual de início rápido para Scanner Brother ADS-2600We. Brother ADS-2600We 23 páginas.
Também para Brother ADS-2600We: Manual de Segurança do Produto (17 páginas)

Imprimir página

Brother ADS-2600We Manual de início rápido

1. For Wireless Network Interface Users

For Wireless Network Users (ADS-2600We only)

Error Code

The Authentication/Encryption methods used by the selected wireless access point/router

are not supported by your machine.

For infrastructure mode, change the authentication and encryption methods of the wireless

access point/router. Your machine supports the following authentication methods:

Authentication Method

TS-04

If your problem is not solved, the SSID or network settings you entered may be incorrect.

Reconfirm the wireless network settings. See How can I find the wireless security

information (SSID* and Network Key**)? on page 16.

For ad-hoc mode, change the authentication and encryption methods of your computer for

the wireless setting. Your machine supports Open authentication method only, with

optional WEP encryption.

The security information (SSID/Network Key) is incorrect.

Confirm the SSID and security information (Network Key). See How can I find the wireless

TS-05

security information (SSID* and Network Key**)? on page 16.

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother

machine supports the use of the first WEP key only.

The wireless security information (Authentication method/Encryption method/Network

Key) is incorrect.

Confirm the wireless security information (Authentication method/Encryption method/

TS-06

Network Key) using the Authentication Method table in error TS-04. See How can I find the

wireless security information (SSID* and Network Key**)? on page 16.

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother

machine supports the use of the first WEP key only.

The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled.

To configure your wireless settings using WPS or AOSS™, you must operate both your

machine and the wireless access point/router.

Confirm that your wireless access point/router supports WPS or AOSS™, and try starting

step 7 on page 15 again.

TS-07

If you do not know how to operate your wireless access point/router

using WPS or AOSS™, see the documentation provided with your

wireless access point/router, ask the manufacturer of your wireless

access point/router, or ask your network administrator.

Two or more wireless access points that have WPS or AOSS™, enabled are detected.

Confirm that only one wireless access point/router within range has the WPS or AOSS™

TS-08

method active and try again.

To avoid interference from other access points, after a few minutes, try again starting from

step 7 on page 15.

The machine is still trying to connect to your wireless network. Please wait a few minutes,

TS-20

and then check the WLAN status.