Fujitsu T4220 - LifeBook Tablet PC Bios Manual - Página 23

Procurar online ou descarregar pdf Bios Manual para Tablet Fujitsu T4220 - LifeBook Tablet PC. Fujitsu T4220 - LifeBook Tablet PC 30 páginas. Lifebook t series
Também para Fujitsu T4220 - LifeBook Tablet PC: Manual do utilizador (13 páginas)

Imprimir página

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.
Drive0:
Drive1:
Password Entry on Boot:
F1
ESC
Table 15: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Drive0:
___
Set Master
___
Password
Set User
___
Password
Drive1:
___
Set Master
___
Password
Phoenix TrustedCore(tm) Setup Utility
Info
System
Advanced
Hard Disk Security
Clear
Set Master Password
[Enter]
Set User Password
[Enter]
Not Available
Set Master Password
[Enter]
Set User Password
[Enter]
[Enabled]
Help
Select Item
Exit
Select Menu
Figure 15. Hard Disk Security Submenu
Default
Description
Clear
Display-only. Default is Clear. When the Drive0 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
[Enter]
Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive0 Password is set, it must
be used to access the hard drive if it is used in another system. Note that the pass-
word will not take effect until the system has been rebooted.
[Enter]
Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may
be up to seven characters long and must include only letters or numbers (no sym-
bols). Passwords are NOT case-sensitive. When a Drive0 Password is set, it must be
used to access the hard drive if it is used in another system. Note that the password
will not take effect until the system has been rebooted.
Clear
Display-only. Default is Clear. When the Drive1 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
[Enter]
Sets, changes or cancels the Drive1 Master Password. The Drive10 Master Password
may be up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. When a Drive0 Password is set, it must
be used to access the hard drive if it is used in another system. Note that the pass-
word will not take effect until the system has been rebooted.
Security
Boot
-/Space
Change Values
Enter
Select
Sub-Menu
S e c u r i t y M e n u
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
23