Fujitsu D1451 Manual técnico - Página 41

Procurar online ou descarregar pdf Manual técnico para Placa-mãe Fujitsu D1451. Fujitsu D1451 42 páginas. Siemens

SmartCard reader - error messages

This chapter contains error messages generated by the SmartCard reader (chipcard reader).

Boot access denied

The Sicrypt SmartCard has no access rights to the system.

Check your chipcard

Either the Sicrypt SmartCard has been wrongly inserted, or it is not a PC-Lock Sicrypt card.

Chipcard reader FAIL

An error has occurred on the serial port to the SmartCard reader (chipcard reader). If this error

occurs always or often, the connection between the SmartCard reader and the mainboard must

be checked, or the SmartCard reader must be replaced. While the error is present, access to

the system is blocked.

Non authorized chipcard

The Sicrypt SmartCard cannot be used on this PC. The Sicrypt SmartCard has been

configured for a different PC.

PC-Lock installation FAIL:

An error has occurred during installation of PC Lock. Do not switch off, but insert the

"BIOS Flash diskette", and try the installation again.

The chipcard is blocked.

Enter the Admin PIN:

You have exceeded the maximum number of failed attempts to enter the PIN. The Sicrypt

SmartCard is blocked.

Enter the administrator PIN to re-activate the Sicrypt SmartCard. You must then enter a new

User PIN to restart the system.

A26361-D1451-Z120-1-6319

SmartCard reader - error messages

English - 31